Brackets and mounts
Omni Wheel Hub and Rollers (Separate)
- Bounding box
- 256.5 × 28 × 14 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Total outer diameter (including rollers): 28 mm (strictly between 25 mm and 30 mm). Wheel width: 14 mm. Center bore: 7.15 mm across-flats hexagonal hole (sized for a 7 mm hex shaft with 3D printing clearance). Rollers: 8 barrel-shaped rollers arranged evenly around the perimeter at a 45-degree angle to the wheel's rotational axis. Construction: Separate the model into printable parts laid flat on the Z=0 build plate: (1) the central hub with 45-degree mounting forks/brackets, and (2) the 8 individual rollers, each with a 1.85 mm center hole to use standard 1.75 mm filament as axle pins. Include a parameter left_handed = true; at the top of the code so I can easily export both mirrored left and right wheel variants. Ensure clean manifold geometry with $fn=60.
Parameters
| Name | Value | Range |
|---|---|---|
| Left-handed variant | 1 | 0 – 1 |
| Gap between parts | 30 mm | 15 – 60 |
| Total outer diameter including rollers | 28 mm | 25 – 30 |
| Hub outer diameter | 20 mm | 18 – 24 |
| Hub width | 14 mm | 10 – 20 |
| Hex bore across flats | 7.15 mm | 6 – 8 |
| Roller max diameter | 5 mm | 4 – 6 |
| Roller length | 12 mm | 8 – 16 |
| Axle hole diameter | 1.85 mm | 1.5 – 2.2 |
| Fork post diameter | 5 mm | 4 – 8 |
| Fork post height | 14 mm | 10 – 20 |
| Roller axle angle to wheel axis | 45 deg | 30 – 60 |
| Number of rollers | 8 mm | 4 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
