Enclosures and housings
OLED Calculator Housing (Split Case)
- Bounding box
- 92 × 152 × 16 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
The casing must be able to be split into two parts to accommodate components inside; there must be space at the top for all the keys and the screen to protrude, and the bottom must be a single, solid piece. There must also be a slot at the bottom of the calculator to connect a Type-C cable.
Parameters
| Name | Value | Range |
|---|---|---|
| Body width | 92 mm | 50 – 160 |
| Body height | 152 mm | 80 – 240 |
| Body thickness | 16 mm | 8 – 40 |
| Corner radius | 8 mm | 2 – 20 |
| Viewing window width | 26 mm | 10 – 60 |
| Viewing window height | 14 mm | 6 – 40 |
| Window corner radius | 2 mm | 0 – 8 |
| Bezel recess width | 34 mm | 14 – 80 |
| Bezel recess height | 28 mm | 10 – 60 |
| Bezel corner radius | 4 mm | 0 – 10 |
| Bezel recess depth | 2 mm | 0.5 – 8 |
| Display centre Y | 50 mm | 20 – 110 |
| Button socket size | 13 mm | 6 – 24 |
| Button socket depth | 3 mm | 1 – 8 |
| Numeric column spacing | 18 mm | 10 – 30 |
| Numeric row spacing | 18 mm | 10 – 30 |
| Numeric grid centre Y | -36 mm | -80 – 20 |
| Special row centre Y | 18 mm | -20 – 80 |
| Special button spacing | 16 mm | 10 – 28 |
| Front cover thickness | 4 mm | 2 – 12 |
| Back wall thickness | 2.5 mm | 1.2 – 8 |
| Side wall thickness | 3 mm | 1.5 – 8 |
| Screw boss diameter | 6 mm | 4 – 14 |
| Screw clearance hole diameter | 3.4 mm | 2.5 – 6 |
| Screw pilot hole diameter | 2.5 mm | 1.5 – 4 |
| Type-C slot width | 10 mm | 6 – 20 |
| Type-C slot height | 4 mm | 2 – 10 |
| Type-C slot centre height | 4 mm | 1.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,