Brackets and mounts
Octagonal Robot Chassis
- Bounding box
- 365 × 400 × 102.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
An ontagonal chassis, measuring 300 by 400mm, 2 active wheels infront of the chassis using 85mm rubber wheel, a caster wheel at the back 1.5 swiveled. 1 open window for the front side of the chassis, displaying a 16x2 lcd. and a an opening to the deck for the pms5003 sensor, in the middle of the deck will be a placement of a circular chamber for a hepa filter, chassis must be 3mm thick and must have holes for component mounting
Parameters
| Name | Value | Range |
|---|---|---|
| Deck width X | 300 mm | 200 – 400 |
| Deck length Y | 400 mm | 250 – 500 |
| Deck plate thickness | 3 mm | 2 – 6 |
| Octagon corner chamfer | 80 mm | 20 – 120 |
| Deck underside above ground | 60 mm | 30 – 120 |
| Drive wheel diameter | 85 mm | 40 – 150 |
| Drive wheel width | 30 mm | 10 – 60 |
| Drive wheel axle Y position | 110 mm | 0 – 180 |
| Caster wheel diameter | 38 mm | 20 – 80 |
| Caster wheel width | 24 mm | 10 – 50 |
| Caster Y position | -160 mm | -190 – -50 |
| LCD module width | 80 mm | 60 – 120 |
| LCD module height | 36 mm | 20 – 60 |
| LCD module depth | 12 mm | 6 – 25 |
| PMS5003 width | 50 mm | 20 – 80 |
| PMS5003 depth | 38 mm | 20 – 70 |
| PMS5003 height | 21 mm | 10 – 40 |
| HEPA chamber outer diameter | 100 mm | 60 – 160 |
| HEPA chamber height | 40 mm | 20 – 90 |
| HEPA chamber wall thickness | 6 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
