Enclosures and housings
Nordic Wave Dock
- Bounding box
- 85.0 × 70.0 × 95.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable, minimalist, monolithic smartphone and tablet desk stand inspired by Nordic interior design ("Nordic Wave Dock"). Key Design Specifications: 1. Overall Dimensions: - Height: 95 mm - Width: 70 mm - Base Depth: 85 mm - Wall/Profile Thickness: 7 mm (solid, continuous ribbon-like structure) - Edge Fillets: 4 mm radius on all outer edges for a smooth, organic feel. 2. Ergonomics & Geometry: - Backrest Slope: Smooth continuous curve recline at 62 degrees relative to the horizontal base plane for optimal viewing angles. - Front Retention Lip: U-shaped lip with a depth of 15 mm to hold phones with thick protective cases, ending in a subtle 12 mm upward wave tab angled slightly inward at 80 degrees. - Cable Management: * A centered eliptical cutout (14 mm x 10 mm) at the bottom groove of the front lip for charging cable pass-through. * An arched bottom relief cutout (12 mm high) at the rear-bottom curve to allow cables to pass freely underneath. 3. 3D Printing & Manufacturing Constraints: - Designed to be printed flat on its 70 mm lateral side. - Completely supportless geometry when placed on its side. - Clean, smooth, non-textured surface geometry optimized for FDM printing with PLA Matte filament. Output format required: Export as a watertight, manifold STL / STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 95 mm | 60 – 150 |
| Width | 70 mm | 40 – 120 |
| Base Depth | 85 mm | 50 – 160 |
| Profile Thickness | 7 mm | 4 – 15 |
| Edge Fillet Radius | 4 mm | 0 – 8 |
| Backrest Recline Angle | 62 deg | 45 – 80 |
| Retention Lip Depth | 15 mm | 8 – 30 |
| Wave Tab Height | 12 mm | 5 – 30 |
| Wave Tab Inward Angle | 80 deg | 60 – 90 |
| Cable Hole Width | 14 mm | 6 – 30 |
| Cable Hole Depth | 10 mm | 4 – 20 |
| Rear Relief Diameter | 12 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no