Brackets and mounts
NodeA Sky Shield - Sealed Enclosure with NeuroFlow Spreader & Bio-Shield Canopy
- Bounding box
- 345.0 × 328.0 × 225.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D parametric CAD assembly (STEP format) for an outdoor fanless industrial electronics enclosure named "NodeA Sky Shield" with the following exact geometry: 1. Inner Sealed Enclosure: - Rectangular box: 300 mm (L) x 300 mm (W) x 200 mm (H), wall thickness 4 mm (Aluminium 6061). - Completely sealed inner cavity with a bolted top/side gasketed lid (no ventilation holes or openings into the inner chamber). - Internal mounting bosses for a central PCB (150 x 150 mm) and a 25 x 25 mm processor heat source block at the center. 2. NeuroFlow Passive Heat Spreader (Internal-to-Wall Conduction): - A solid high-conductivity branching network (vascular/dendritic rib pattern following Murray's Law tapering) extending radially from a central 30 x 30 mm cold block (contacting the processor) outward across the inner wall toward the rear/side heat rejection surface. - Branch thickness tapers from 6 mm at the center trunk down to 2 mm at the outer tips. 3. Desert Bio-Shield (External Solar Shield & Chimney Air Gap): - An external double-walled curved/angled solar canopy covering the top and sun-facing sides, offset from the main enclosure by a uniform 20 mm open air gap. - Top and bottom of the 20 mm air gap remain open to allow vertical natural convection (chimney effect), while keeping the inner enclosure completely sealed. - Leave the rear/shaded wall exposed with vertical passive cooling fins (15 mm height, 3 mm thickness, 10 mm spacing) for external heat rejection. Output clean, manifold solid bodies suitable for CFD/CHT thermal meshing (SimScale / Ansys).
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 300 mm | 100 – 600 |
| Enclosure Width | 300 mm | 100 – 600 |
| Enclosure Height | 200 mm | 60 – 400 |
| Wall Thickness | 4 mm | 2 – 12 |
| Top Flange Width | 20 mm | 8 – 45 |
| Top Flange Thickness | 15 mm | 5 – 40 |
| Lid Thickness | 10 mm | 4 – 25 |
| Lid Bolt Clearance Dia | 5.5 mm | 3 – 12 |
| Bolt Inset From Edge | 6 mm | 3 – 15 |
| Gasket Groove Width | 6 mm | 3 – 15 |
| Gasket Thickness | 2 mm | 1 – 6 |
| Gasket Inset From Edge | 12 mm | 5 – 25 |
| PCB Boss Diameter | 10 mm | 5 – 20 |
| PCB Boss Height | 30 mm | 10 – 80 |
| PCB Boss Spacing | 130 mm | 60 – 260 |
| PCB Square Size | 150 mm | 50 – 280 |
| PCB Thickness | 1.6 mm | 0.8 – 4 |
| PCB Mounting Hole Dia | 3.2 mm | 1 – 8 |
| Processor Block Size | 25 mm | 10 – 60 |
| Processor Block Height | 5 mm | 2 – 15 |
| Cold Block Size | 30 mm | 15 – 60 |
| Cold Block Height | 8 mm | 3 – 20 |
| Trunk Diameter (Centre) | 6 mm | 3 – 15 |
| Tip Diameter (Wall End) | 2 mm | 1 – 8 |
| Trunk Reach Radius | 80 mm | 30 – 140 |
| Fin Protrusion Height | 15 mm | 5 – 40 |
| Fin Thickness | 3 mm | 1 – 8 |
| Fin Gap Spacing | 10 mm | 3 – 30 |
| Fin Base Plate Thickness | 3 mm | 1 – 8 |
| Fin Count | 23 pcs | 5 – 40 |
| Chimney Air Gap | 20 mm | 5 – 60 |
| Canopy Wall Thickness | 5 mm | 2 – 15 |
| Canopy Length (X) | 345 mm | 200 – 600 |
| Canopy Width (Y) | 320 mm | 200 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
