Brackets and mounts
Nissan Patrol Y61 GU4 Nav Panel Storage Shelf
- Bounding box
- 126 × 74 × 29 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable storage shelf for a Nissan Patrol Y61 GU4 (2005), designed to replace the original factory navigation control button panel in the center dashboard. The shelf should fit precisely into the original rectangular opening and use the factory mounting points. Design requirements: * OEM-style appearance matching the original dashboard. * Slightly recessed storage compartment. * Rounded corners and smooth edges. * Raised front and side lips to prevent objects from sliding out. * Solid walls suitable for 3D printing. * No unnecessary supports or complicated geometry. * One-piece design. * Optimized for ASA 3D printing. * Realistic automotive interior finish. The model must be parametric and editable. Use millimeters as units. Do not assume exact dimensions; make the mounting dimensions adjustable.
Parameters
| Name | Value | Range |
|---|---|---|
| Opening width | 110 mm | 60 – 200 |
| Opening height | 58 mm | 30 – 120 |
| Opening corner radius | 7 mm | 1 – 20 |
| Clearance to opening per side | 0.3 mm | 0.05 – 1 |
| Bezel overlap onto dash face | 8 mm | 3 – 15 |
| Bezel / pocket floor thickness | 3 mm | 1.6 – 6 |
| Depth into dash / pocket depth | 26 mm | 10 – 60 |
| Pocket wall thickness | 2.2 mm | 1.2 – 6 |
| Bezel corner radius | 11 mm | 2 – 30 |
| Retaining lip height | 9 mm | 0 – 40 |
| Lip inward protrusion at mouth | 4 mm | 0 – 15 |
| Lip taper height | 4 mm | 0.5 – 20 |
| Pocket corner radius | 5 mm | 1 – 20 |
| Factory screw spacing X | 72 mm | 20 – 180 |
| Screw hole diameter | 3.4 mm | 2 – 6 |
| Countersink chamfer | 0.8 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
