Brackets and mounts
NEXBOX Drainable Enclosure Assembly
- Bounding box
- 246.0 × 229.5 × 101.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Review the entire NEXBOX model for functional symmetry. Rotate the complete assembly by exactly 180 degrees and identify every component, connection, seal, and mounting feature that becomes unusable. Correct the geometry while preserving the external dimensions and minimum component count. Perform a gravity-drainage design review in both 180-degree installation orientations. Show the internal water collection surfaces, drainage channels, active lower outlet, and sealed unused outlet. Identify all possible water-trapping areas and propose geometric corrections. Do not claim successful drainage without demonstrating a continuous downhill path. Review the NEXBOX enclosure for injection molding feasibility. Evaluate wall thickness, draft angles, ribs, fillets, undercuts, parting lines, sealing surfaces, shrinkage risks, and warpage. Recommend a simplified design that minimizes tooling complexity and the number of separate components.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length | 200 mm | 120 – 300 |
| Body width | 120 mm | 80 – 240 |
| Body height | 90 mm | 50 – 200 |
| Wall thickness | 3.5 mm | 1.5 – 8 |
| Bottom thickness | 5 mm | 2 – 15 |
| Internal drainage slope rise | 22 mm | 5 – 50 |
| Outlet boss OD | 22 mm | 12 – 40 |
| Outlet boss length | 8 mm | 3 – 20 |
| Drain bore diameter | 14 mm | 6 – 30 |
| Plug boss bore diameter | 14 mm | 6 – 30 |
| Drain outlet height | -33 mm | -44 – 20 |
| Plug outlet height | 20 mm | -20 – 40 |
| Gasket outer length | 190 mm | 140 – 280 |
| Gasket outer width | 110 mm | 70 – 200 |
| Gasket thickness | 3 mm | 1 – 8 |
| Gasket track width | 5 mm | 2 – 12 |
| Lid thickness | 8 mm | 3 – 20 |
| Drain fitting OD | 20 mm | 8 – 40 |
| Drain fitting bore | 12 mm | 4 – 30 |
| Drain fitting length | 25 mm | 10 – 60 |
| Plug cap OD | 18 mm | 8 – 40 |
| Plug spigot OD | 13.5 mm | 5 – 30 |
| Plug overall length | 12 mm | 5 – 30 |
| Plug insertion length | 7 mm | 1 – 15 |
| O-ring groove diameter | 12 mm | 4 – 28 |
| O-ring groove width | 2 mm | 1 – 5 |
| O-ring groove position | 2 mm | 0 – 10 |
| Bracket length | 40 mm | 20 – 80 |
| Bracket height | 30 mm | 15 – 80 |
| Bracket thickness | 6 mm | 2 – 15 |
| Slot offset from center | 12 mm | 3 – 30 |
| Slot width | 5 mm | 2 – 12 |
| Slot length | 14 mm | 5 – 30 |
| Bracket side position | 60 mm | 20 – 100 |
| Bracket height position | 0 mm | -44 – 44 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
