Brackets and mounts
Nespresso Essenza Mini Thermoblock Assembly
- Bounding box
- 89.0 × 64.0 × 58.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed mechanical 3D CAD representation of the Thermoblock used in the Nespresso Essenza Mini EN85 VTP1. The thermoblock is a compact metallic water-heating assembly located inside the fluid box. Include the external metallic body, hydraulic inlet and outlet ports, mounting features, electrical terminal locations, temperature sensor mounting position and thermal protection component interfaces. Represent the heating body, sensors and electrical connections as separate components where possible. The external geometry must match the original thermoblock using photographs and measurements. The internal water channel may be represented as a simplified passage unless its exact geometry is available. The design must be treated as a non-functional visual and mechanical CAD model until the material, pressure resistance, electrical insulation and thermal performance have been independently validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 75 mm | 40 – 150 |
| Body Width | 42 mm | 20 – 100 |
| Body Height | 32 mm | 15 – 80 |
| External Rib Count | 7 - | 0 – 16 |
| Rib Thickness | 1.5 mm | 0.5 – 5 |
| Rib Height | 3.5 mm | 0.5 – 10 |
| Internal Channel Diameter | 2 mm | 1 – 10 |
| Inlet Port X Position | -25 mm | -60 – 60 |
| Inlet Port Z Height | 8 mm | 2 – 40 |
| Outlet Port X Position | 25 mm | -60 – 60 |
| Outlet Port Z Height | 24 mm | 2 – 40 |
| Port Outer Diameter | 8 mm | 4 – 20 |
| Port Length | 12 mm | 5 – 40 |
| Port Bore Diameter | 4 mm | 1 – 12 |
| Sealing Collar Diameter | 11 mm | 6 – 25 |
| Bracket Width | 55 mm | 20 – 120 |
| Bracket Height | 20 mm | 10 – 60 |
| Bracket Thickness | 2 mm | 1 – 8 |
| Fixing Hole Diameter | 4.5 mm | 2 – 10 |
| Terminal Block Length | 18 mm | 8 – 50 |
| Terminal Block Width | 12 mm | 6 – 40 |
| Terminal Block Height | 8 mm | 3 – 30 |
| Spade Terminal Width | 6.3 mm | 2 – 15 |
| Spade Terminal Thickness | 0.8 mm | 0.3 – 3 |
| Spade Terminal Length | 10 mm | 4 – 30 |
| Sensor Diameter | 6 mm | 2 – 20 |
| Sensor Length | 15 mm | 5 – 50 |
| Sensor X Position | 8 mm | -40 – 40 |
| Sensor Z Height | 24 mm | 2 – 40 |
| Thermal Fuse Diameter | 10 mm | 4 – 30 |
| Thermal Fuse Thickness | 4 mm | 1 – 15 |
| Thermal Fuse Z Height | 20 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
