Enclosures and housings
NES Cartridge Drawer Box
- Bounding box
- 154.6 × 236 × 144.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
I would like to create a drawer at Will House, 10 NES cartridges, either with dust covers or not. and they will be aligned front to back as if they’re standing in line with the artwork of the front cartridge visible and all the rest of the cartridges behind. They will sit in a drawer that is half the height of the cartridge, so that the front cartridge can be seen when it is inside the outer shell that will have a top bottom sides and back side with a very basic rail system for the drawer to line up on. This shell must have feet and indent on the top so that they’re stackable, and then also have slight NES style elements on it that are nothing too fancy, maybe the iconic grilled design
Parameters
| Name | Value | Range |
|---|---|---|
| Cartridge width | 135 mm | 60 – 200 |
| Cartridge thickness | 20 mm | 10 – 60 |
| Cartridge height | 120 mm | 60 – 200 |
| Number of cartridges | 10 mm | 1 – 20 |
| Gap between cartridges | 2 mm | 0 – 10 |
| Drawer wall thickness | 3.5 mm | 1.6 – 6 |
| Play each side of cartridges | 1.5 mm | 0.4 – 5 |
| Play at drawer ends | 2 mm | 0.5 – 20 |
| Finger notch width | 60 mm | 20 – 120 |
| Finger notch height | 16 mm | 8 – 40 |
| Finger notch depth | 2 mm | 0.6 – 3 |
| Shell wall thickness | 4 mm | 2 – 10 |
| Drawer sliding clearance | 0.8 mm | 0.2 – 2 |
| Clearance behind drawer | 3 mm | 1 – 20 |
| Clearance above cartridges | 2 mm | 0.5 – 10 |
| Rail height | 4 mm | 2 – 10 |
| Rail width | 4 mm | 2 – 10 |
| Bottom plate thickness | 4 mm | 2 – 12 |
| Top plate thickness | 6 mm | 3 – 12 |
| Foot height | 5 mm | 2 – 12 |
| Foot diameter | 10 mm | 4 – 20 |
| Foot inset from edges | 16 mm | 8 – 40 |
| Number of grille slots | 6 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
