Enclosures and housings
Mystic Hair Accessory Tower
- Bounding box
- 180 × 110 × 113.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Generate the attached accessory box Make the horizontal bars removable
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 180 mm | 120 – 260 |
| Overall depth | 110 mm | 80 – 180 |
| Base plate thickness | 8 mm | 5 – 15 |
| Base corner radius | 25 mm | 5 – 45 |
| Minimum gap from base edge | 6 mm | 3 – 20 |
| Tower diameter at bottom | 44 mm | 30 – 70 |
| Tower diameter at top | 54 mm | 30 – 80 |
| Tower wall thickness | 3 mm | 1.6 – 6 |
| Tower height | 80 mm | 40 – 140 |
| Tower floor thickness | 5 mm | 3 – 12 |
| Battlement notch count | 8 mm | 4 – 16 |
| Battlement notch depth | 8 mm | 3 – 20 |
| Horn diameter at base | 38 mm | 20 – 60 |
| Horn diameter at tip | 8 mm | 4 – 20 |
| Horn height | 105 mm | 50 – 160 |
| Spiral ridge bead size | 6 mm | 3 – 10 |
| Spiral turns | 4 mm | 2 – 8 |
| Wand shaft diameter | 13 mm | 8 – 20 |
| Wand shaft height | 78 mm | 40 – 140 |
| Crystal width | 24 mm | 12 – 40 |
| Crystal height | 26 mm | 12 – 50 |
| Star radius | 9 mm | 5 – 16 |
| Star relief height | 1.6 mm | 0.8 – 4 |
| Moon radius | 9 mm | 5 – 16 |
| Moon thickness | 3 mm | 1.6 – 6 |
| Bar diameter | 8 mm | 5 – 16 |
| Removable bar length | 108 mm | 50 – 170 |
| Cradle post diameter | 14 mm | 9 – 24 |
| Bar fit clearance per side | 0.3 mm | 0.1 – 0.6 |
| Lower bar height above base | 14 mm | 8 – 40 |
| Upper bar height above base | 32 mm | 16 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,