Enclosures and housings
Multi-Part 3D Organizer Assembly
- Bounding box
- 200 × 54.8 × 240.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a multi-part parametric 3D organizer assembly. Part 1: Main Frame. A vertical rectangular block 200mm wide, 50mm deep, 220mm tall. Cut out a central rectangular bay 120mm wide and 140mm tall. Add two vertical side towers on the left and right edges, each capped with a 45-degree cone roof. On the inner side walls of the central bay, cut 2 pairs of parallel semi-circular U-shaped channels (16mm diameter, open at the top) to hold horizontal rods. At the bottom, cut a hollow rectangular drawer cavity 120mm wide, 45mm deep, 40mm tall. Part 2: Removable Rods. Two horizontal cylinders, 15.5mm diameter and 120mm long. Part 3: Sliding Drawer. A open-top box 119.2mm wide, 44.5mm deep, 39.5mm tall with 2mm wall thickness. Add a 15mm heart-shaped extrusion on the front face centered as a handle.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame total width | 200 mm | 150 – 300 |
| Frame total depth | 50 mm | 30 – 100 |
| Frame main height | 220 mm | 180 – 300 |
| Central bay width | 120 mm | 80 – 200 |
| Central bay height | 140 mm | 80 – 200 |
| Drawer cavity width | 120 mm | 80 – 200 |
| Drawer cavity depth | 45 mm | 20 – 90 |
| Drawer cavity height | 40 mm | 25 – 80 |
| Tower cone roof height | 20 mm | 10 – 50 |
| Rod diameter | 15.5 mm | 10 – 25 |
| Rod length | 120 mm | 80 – 200 |
| Channel diameter | 16 mm | 11 – 26 |
| Upper rod Z height | 140 mm | 100 – 180 |
| Lower rod Z height | 85 mm | 50 – 120 |
| Drawer width | 119.2 mm | 78 – 198 |
| Drawer depth | 44.5 mm | 18 – 88 |
| Drawer height | 39.5 mm | 23 – 78 |
| Drawer wall thickness | 2 mm | 1 – 4 |
| Heart handle size | 15 mm | 10 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,