MRTV-TP001

Create a fully parametric SolidWorks part named MRTV-TP001. Units: millimeters. Create a rectangular plate with the following dimensions: Length = 120 mm Width = 90 mm Thickness = 15 mm Round the four outside corners with R10. Create one centered through hole: Diameter = 30 mm Create four identical through holes: Diameter = 10 mm Locate the four holes symmetrically around the center hole using a rectangular pattern. Hole center coordinates relative to the plate center: Upper Left (-35, +25) Upper Right (+35, +25) Lower Left (-35, -25) Lower Right (+35, -25) Create one vertical straight slot on the right side of the center hole. Slot dimensions: Length = 35 mm Width = 10 mm Slot center: X = +25 mm Y = 0 mm Cut the slot Through All. Apply a 1 mm chamfer to all external edges. The model must remain fully parametric. Create the Feature Tree in this exact order: 1. Base Extrude 2. Corner Fillets 3. Center Hole 4. Four Hole Pattern 5. Slot 6. Chamfer Do not add any dimensions, GD&T annotations, datums, cosmetic features, text, material properties, or manufacturing notes. Generate only the native SolidWorks part (.SLDPRT).

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.