Enclosures and housings
MRTV-TP001
- Bounding box
- 120.0 × 90.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully parametric SolidWorks part named MRTV-TP001. Units: millimeters. Use engineering design intent. Create each feature as an independent parametric feature. Maintain a clean Feature Tree. Base Feature: - Rectangular plate - Length = 120 mm - Width = 90 mm - Thickness = 15 mm - Corner fillets: R10 on all four corners Center Hole: - One through hole - Diameter = 20 mm - Located at the exact center of the plate Hole Pattern: - Four identical through holes - Diameter = 8 mm - Through All - Hole center coordinates relative to the plate center: - Upper Left (-35, +25) - Upper Right (+35, +25) - Lower Left (-35, -25) - Lower Right (+35, -25) Straight Slot: - Through All - Length = 40 mm - Width = 8 mm - Vertical orientation - Slot center: - X = +25 mm - Y = 0 mm Chamfers: - Apply a 1 mm chamfer to all external edges only. Feature Tree order: 1. Base Extrude 2. Corner Fillets 3. Center Hole 4. Hole Pattern 5. Straight Slot 6. Chamfer Requirements: - Fully parametric model - Stable geometry - Editable features - Preserve symmetry - Do not merge features - No dimensions - No GD&T - No datums - No text - No logos - Generate only the SolidWorks part.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 120 mm | 10 – 500 |
| Plate Width | 90 mm | 10 – 500 |
| Plate Thickness | 15 mm | 1 – 100 |
| Corner Fillet Radius | 10 mm | 1 – 50 |
| Center Hole Diameter | 20 mm | 1 – 100 |
| Pattern Hole Diameter | 8 mm | 1 – 50 |
| Pattern X Offset | 35 mm | 0 – 100 |
| Pattern Y Offset | 25 mm | 0 – 100 |
| Slot Length | 40 mm | 5 – 200 |
| Slot Width | 8 mm | 1 – 50 |
| Slot Center X | 25 mm | -100 – 100 |
| Slot Center Y | 0 mm | -100 – 100 |
| Chamfer Distance | 1 mm | 0.1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no