Jigs and fixtures
MRL-VAULT-001
- Bounding box
- 100.0 × 70.0 × 38.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing MRL-VAULT-001 model. This product is a premium laboratory vault for four standard 3 mL research vials. Do not change the exterior dimensions or outside appearance. Design the interior to support a removable TPU insert that will securely hold four upright 3 mL vials in a 2 × 2 layout. Do not create the vial pockets yet. Instead, create only the recessed pocket and support ledge that will locate the removable TPU insert. The insert should be easily removable by hand but have minimal movement. Leave 0.30 mm clearance around the insert. The ledge should support the insert evenly on all four sides. Keep the model fully parametric. Keep the part printable in PETG or PETG-CF without supports. Maintain a premium engineering appearance suitable for a commercial laboratory product.
Parameters
| Name | Value | Range |
|---|---|---|
| External Length | 100 mm | 50 – 200 |
| External Width | 70 mm | 40 – 150 |
| Wall Thickness | 3 mm | 1.5 – 8 |
| Cavity Depth (internal floor to top) | 35 mm | 20 – 80 |
| Exterior Corner Radius | 5 mm | 0.5 – 15 |
| Top Edge Chamfer | 1 mm | 0 – 3 |
| Bottom Interior Fillet | 2 mm | 0.5 – 5 |
| TPU Insert Thickness | 5 mm | 2 – 10 |
| Support Ledge Width | 4 mm | 2 – 10 |
| Insert Clearance | 0.3 mm | 0.1 – 1 |
| Logo Width | 18 mm | 5 – 40 |
| Logo Height | 8 mm | 3 – 20 |
| Logo Depth | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl