Enclosures and housings
MRL-VAULT-001
- Bounding box
- 93.6 × 73.1 × 35.5 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing MRL-VAULT-001 model. This case will use a removable TPU insert to securely hold four upright standard 3 mL laboratory vials arranged in a 2 × 2 layout. Keep the exterior dimensions unchanged. Replace the flat interior floor with four raised circular support pads positioned for the vial layout. Each support pad should: - Be centered under one vial. - Be 12 mm in diameter. - Extend 2 mm above the floor. - Have a shallow concave top to help center the vial. - Include generous fillets where the pad meets the floor. Do not create the TPU insert or vial pockets yet. Maintain the existing insert support ledge. Keep the model fully parametric and printable in PETG without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| External Length | 80 mm | 40 – 200 |
| External Width | 60 mm | 30 – 150 |
| Wall Thickness | 3 mm | 1.5 – 8 |
| Cavity Depth | 30 mm | 10 – 80 |
| Exterior Corner Radius | 2 mm | 0.5 – 5 |
| Top Edge Chamfer | 1 mm | 0.2 – 3 |
| Interior Floor Fillet | 1 mm | 0.2 – 3 |
| Insert Thickness | 2 mm | 1 – 6 |
| Ledge Width (each side) | 4 mm | 1 – 10 |
| Logo Width | 30 mm | 5 – 60 |
| Logo Height | 10 mm | 2 – 30 |
| Logo Depth | 0.5 mm | 0.2 – 2 |
| Support Pad Diameter | 12 mm | 6 – 20 |
| Pad Height (above floor) | 2 mm | 1 – 5 |
| Pad Base Fillet | 1.5 mm | 0.3 – 3 |
| Indent Sphere Radius | 20 mm | 10 – 40 |
| Indent Depth | 0.5 mm | 0.1 – 1.5 |
| Vial Spacing X | 25 mm | 12 – 120 |
| Vial Spacing Y | 25 mm | 12 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox