Enclosures and housings
Mounting Base Plate with Central Boss
- Bounding box
- 100.0 × 80.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical solid part, unit: mm, export STEP AP214. Square base 100×80×10, four M6 through holes on the base, central cylinder Φ40, height 30, R3 fillet at the top of cylinder, R2 fillet on all sharp edges. No textures, no rendering, for industrial manufacturing.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 100 mm | 40 – 300 |
| Base Width | 80 mm | 40 – 300 |
| Base Thickness | 10 mm | 4 – 40 |
| Boss Diameter | 40 mm | 10 – 200 |
| Boss Height (above plate) | 30 mm | 5 – 150 |
| Mounting Hole Diameter | 6 mm | 2 – 20 |
| Hole Inset from X Edges | 15 mm | 5 – 40 |
| Hole Inset from Y Edges | 15 mm | 5 – 35 |
| Plate Edge Fillet (R2) | 2 mm | 0.5 – 6 |
| Boss Top Fillet (R3) | 3 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no