Enclosures and housings
Motorcycle Left Saddlebag
- Bounding box
- 480.1 × 230.1 × 270.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Create a motorcycle left-side hard saddlebag, hollow, with a top-opening lid. Overall size (bounding box): 480 mm long (X), 230 mm wide (Y), 270 mm tall (Z). Orientation: X axis runs front to back of the motorcycle, Y axis runs outboard to inboard, Z is up. The origin is at the bottom front corner of the inboard face. Shape: a rounded box body. The inboard face (the face against the motorcycle) is flat and vertical. The outboard face is slightly convex and tapers inward toward the bottom by about 8 degrees. The rear end is angled backward-upward at about 15 degrees from vertical. The front end is rounded with a 60 mm radius. All vertical edges filleted at 40 mm, bottom edges filleted at 30 mm, top outer edges filleted at 15 mm. Walls: hollow with a uniform 4 mm wall thickness. The bottom is 5 mm thick. Opening: the top surface is a separate flat-topped opening, 400 mm x 190 mm with 25 mm corner radii, centered on the top face. Leave a 4 mm inner lip around the opening, 6 mm tall, for a gasket seal. Keep the model parametric with the dimensions above as editable parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 480 mm | 100 – 1000 |
| Body Width | 230 mm | 50 – 500 |
| Body Height | 264 mm | 50 – 600 |
| Wall Thickness | 4 mm | 1 – 20 |
| Bottom Thickness | 5 mm | 1 – 20 |
| Vertical Fillet Radius | 40 mm | 0 – 80 |
| Bottom Fillet Radius | 30 mm | 0 – 60 |
| Top Fillet Radius | 15 mm | 0 – 40 |
| Lid Thickness | 6 mm | 2 – 20 |
| Lid Corner Radius | 40 mm | 0 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no