Mechanical parts
Motor-Driven Open Wool & Compost Mixer
- Bounding box
- 195 × 127 × 148 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
napravi da je otvoren sa jedne strane i da ga pokrece elektro motor unutra da budu ravne lopatice da se vuna ne bi mogla zapetljati
Parameters
| Name | Value | Range |
|---|---|---|
| Drum outer diameter | 120 mm | 60 – 200 |
| Drum body length | 160 mm | 80 – 300 |
| Drum wall thickness | 3 mm | 1.2 – 8 |
| Number of flat paddles | 4 mm | 2 – 6 |
| Paddle radial height | 38 mm | 6 – 60 |
| Paddle plate thickness | 5 mm | 2 – 10 |
| Paddle rotor length | 80 mm | 30 – 250 |
| Rotor hub diameter | 30 mm | 10 – 80 |
| Paddle tip clearance to drum wall | 4 mm | 1 – 15 |
| Motor body diameter | 40 mm | 16 – 80 |
| Motor body length | 46 mm | 20 – 120 |
| Motor mounting flange thickness | 5 mm | 3 – 12 |
| Motor shaft stub length | 15 mm | 6 – 40 |
| Shaft diameter | 12 mm | 6 – 25 |
| Crank arm length | 56 mm | 30 – 120 |
| Crank grip diameter | 20 mm | 10 – 40 |
| Drum axis height above the bed | 82 mm | 40 – 200 |
| Leg plate thickness | 12 mm | 6 – 25 |
| Inset of legs from the drum ends | 10 mm | 2 – 40 |
| Leg width at the base | 110 mm | 30 – 200 |
| Leg width at the top | 124 mm | 20 – 220 |
| Leg height above the drum axis | 40 mm | 6 – 90 |
| Base plate width | 124 mm | 40 – 250 |
| Base plate thickness | 6 mm | 3 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
