Enclosures and housings
Monte Carlo Shotgun Stock
- Bounding box
- 31.1 × 6.3 × 2.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric shotgun stock (Monte Carlo style) in inches, viewed from the side profile extruded with thickness: REFERENCE: Bore axis is a horizontal line at y=0. Stock extends leftward from origin. BODY: - Overall stock length: 31.125 inches (from wrist front to buttplate back) - Wrist thickness (front, at y=0): 1.25 inches - Top edge: starts at wrist at y=+0.5, rises gently to comb - Bottom edge: starts at wrist at y=-1.0, slopes down to heel COMB (Monte Carlo / parallel): - Comb top is flat (parallel to bore axis) - Drop at comb: 1.5 inches below bore axis (comb top at y=-1.5) - Comb runs from x=-8 to x=-18 (measured from wrist) GRIP (semi-pistol grip): - Grip girth at thickest point: 2.25 inches - Grip angle: 15 degrees from vertical - Grip starts at x=-18, extends to x=-22 - Bottom edge curves down to meet buttplate HEEL & BUTT: - Drop at heel: 2.25 inches below bore axis (heel top at y=-2.25) - Buttplate: flat vertical face at x=-31.125 - Buttplate width (front-to-back thickness): 0.25 inches - Buttplate height: 3.5 inches - Buttplate center at y=-1.0 CAST: - Entire stock offset 0.25 inches to the right (right-handed) PARAMETERS (make these adjustable sliders): - LOP (trigger to buttplate center): 13.75 inches - Drop at comb: 1.5 inches - Drop at heel: 2.25 inches - Cast: 0.25 inches - Wrist thickness: 1.25 inches - Buttplate width: 2.75 inches - Buttplate height: 3.5 inches
Parameters
| Name | Value | Range |
|---|---|---|
| Length of pull (in) | 13.75 mm | 10 – 18 |
| Drop at comb (in) | 1.5 mm | 0 – 4 |
| Drop at heel (in) | 2.25 mm | 0 – 5 |
| Cast offset (in) | 0.25 mm | 0 – 1 |
| Wrist thickness (in) | 1.25 mm | 0.8 – 2.5 |
| Buttplate width / stock thickness (in) | 2.75 mm | 1.5 – 4 |
| Buttplate height (in) | 3.5 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no