Brackets and mounts
Monster Can Holder (exploded multi-part)
- Bounding box
- 278 × 241.5 × 151 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully functional 3D-printable Monster Energy can holder. It must have a cylindrical body, three Monster claw cut-outs through the front, MONSTER lettering cut through the body, a threaded screw-on bottom, and a threaded screw-on top ring. The lid must flip open on a working hinge connected to the top ring. All parts must connect properly. Generate every component separately, with space between parts on the print bed. Show me a complete assembled 3D preview and an exploded view. Export individual STL files and a complete assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap | 100 mm | 80 – 200 |
| Body outer diameter | 76 mm | 50 – 150 |
| Body inner diameter | 68 mm | 50 – 140 |
| Body height | 150 mm | 100 – 250 |
| Thread length | 18 mm | 10 – 40 |
| Thread pitch | 3 mm | 2 – 8 |
| Thread clearance per side | 0.3 mm | 0.1 – 1 |
| Bottom cap / top ring OD | 78 mm | 60 – 160 |
| Bottom cap height | 18 mm | 8 – 40 |
| Top ring height | 20 mm | 10 – 40 |
| Lid outer diameter | 78 mm | 60 – 160 |
| Lid thickness | 8 mm | 4 – 20 |
| Hinge pin diameter | 3 mm | 2 – 8 |
| Hinge pin length | 30 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
