Enclosures and housings
Monopolar HF Surgery Electrode
- Bounding box
- 70.0 × 4.6 × 4.6 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a precise 3D CAD model of a Monopolar HF Surgery Electrode (electrosurgical pencil tip) based on the following exact dimensions and features. The total length is 70 mm. The model must be a single solid body with three distinct sections along a central axis: 1. Rear Shaft (Tungsten): - Length: 16.5 mm - Diameter: 2.4 mm (cylindrical) - Position: Starting from the left (x=0). 2. Insulation Sleeve (PEEK, Blue): - Length: 25.5 mm - Outer Diameter: 4.0 mm - Position: Immediately after the shaft (from x=16.5 to x=42.0). - Features: Create 3 evenly spaced circumferential ribs (ridges) on this sleeve for grip. The ribs should be slightly raised (e.g., +0.3 mm) compared to the main 4.0 mm diameter. 3. Transition Cone (Tungsten): - Length: 10.5 mm - Position: From x=42.0 to x=52.5. - Geometry: A tapered trapezoid that starts at a circular diameter of 2.4 mm and smoothly transitions to a rectangular flat profile with dimensions Width = 2.3 mm and Thickness = 0.55 mm. 4. Active Blade (Tungsten): - Length: 17.5 mm - Position: From x=52.5 to x=70.0. - Geometry: A flat rectangular bar with Width = 2.3 mm and Thickness = 0.55 mm. - Tip Feature: The distal end (far right, x=70) must have a sharp bevel (cutting edge) at an angle of 15 to 20 degrees, tapering to a sharp edge. Visual & Material Details: - Apply a Blue color to the PEEK insulation section. - Apply a Polished Metallic (Tungsten) finish to the shaft, cone, and blade. - Ensure all transitions are smooth and the central axis is perfectly aligned. - The final output should be a single watertight solid model suitable for export as STEP or STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Rear Shaft Length | 16.5 mm | 5 – 40 |
| Shaft Diameter | 2.4 mm | 1 – 6 |
| Sleeve Length | 25.5 mm | 8 – 60 |
| Sleeve Outer Diameter | 4 mm | 2 – 10 |
| Grip Rib Count | 3 pcs | 0 – 8 |
| Rib Radial Height | 0.3 mm | 0.05 – 1 |
| Rib Axial Width | 2 mm | 0.5 – 6 |
| Transition Cone Length | 10.5 mm | 2 – 30 |
| Blade Length | 17.5 mm | 3 – 50 |
| Blade Width | 2.3 mm | 0.5 – 8 |
| Blade Thickness | 0.55 mm | 0.2 – 3 |
| Tip Bevel Angle | 17 deg | 5 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no