Enclosures and housings
Monitor Bezel Enclosure
- Bounding box
- 508 × 328 × 61 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular hollow monitor bezel enclosure box. Outer dimensions: 508 mm length, 328 mm width, 61 mm height. Wall thickness is 3 mm on all sides and the top face. The bottom is completely open. On the top face (front bezel), cut a centered rectangular window hole measuring 490 mm length by 310 mm width going all the way through the 3 mm top wall. Sharp 90-degree corners, clean functional 3D printable enclosure.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 508 mm | 50 – 1000 |
| Outer width | 328 mm | 50 – 1000 |
| Outer height | 61 mm | 20 – 300 |
| Wall thickness | 3 mm | 1.2 – 10 |
| Window length | 490 mm | 10 – 1000 |
| Window width | 310 mm | 10 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,