Enclosures and housings
Mold-Ready Tapered Flower Pot
- Bounding box
- 172.2 × 172.1 × 150.3 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric, mold-ready indoor flower pot designed for production casting. Main Body Geometry: - Shape: A solid, hollowed rotationally symmetrical cylinder with a uniform outward taper. - Overall Height: 150 mm. - External Base Diameter: 100 mm. - External Top Opening Diameter: 160 mm. - Core-side and cavity-side walls must taper continuously from base to top, establishing a consistent mold-release draft angle of approximately 11.3 degrees relative to the vertical axis. Wall Thickness and Tooling Features: - Wall Thickness: Perfectly uniform at 4.0 mm across all side walls and the base floor to prevent sink marks and uneven thermal shrinkage during material cooling. - Top Rim: Add an external reinforced collar rim at the very top opening. The rim height should be 12 mm, extending outwards by an additional 6 mm from the top diameter. - Internal Geometry: The inside cavity must match the outer taper to ensure no zero-draft or negative-draft undercuts that could trap the core. Functional Details: - Drainage: Include a single, clean through-hole centered at the origin of the base floor with a diameter of 12 mm. - Output: Generate as a clean solid model suitable for B-Rep / STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| External Base Diameter | 100 mm | 40 – 300 |
| External Top Opening Diameter | 160 mm | 60 – 400 |
| Overall Height | 150 mm | 30 – 400 |
| Uniform Wall Thickness | 4 mm | 1 – 20 |
| Rim Height | 12 mm | 2 – 60 |
| Rim Outward Protrusion | 6 mm | 0 – 40 |
| Drain Hole Diameter | 12 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no