Enclosures and housings
MODULOCK V2 Stage 1 Universal PVC Socket (exploded)
- Bounding box
- 1004 × 100 × 110 mm
- Engine
- 3D Printing B-rep
- Parameters
- 41
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Design Stage 1 of MODULOCK V2: a universal PVC pipe gripping socket. MODULOCK is a tool-free structural connector intended for emergency shelters and temporary structures. It must be inexpensive, reusable and simple to operate. Create one cylindrical socket housing with an adjustable internal gripping mechanism. PIPE COMPATIBILITY: The socket must accommodate these actual PVC pipe outside diameters: - 20 mm - 25 mm - 32 mm - 40 mm - 50 mm Use one captive adjustable gripping mechanism. Do not use separate interchangeable inserts. MECHANISM: - Three radial gripping jaws arranged 120 degrees apart. - Jaws must move symmetrically towards the centre. - Captive adjustment mechanism. - Internal pipe insertion stop. - External collar reserved for a future 90-degree quarter-turn locking mechanism. - No loose components. DESIGN REQUIREMENTS: - Tool-free adjustment. - Distribute gripping pressure around the pipe. - Avoid excessive compression of PVC. - Allow different pipe diameters to enter the same socket. - Keep the mechanism compact and manufacturable. - Use millimetres throughout. CAD DELIVERABLES: 1. Complete socket housing. 2. Internal gripping jaws. 3. Captive adjustment mechanism. 4. Exploded assembly view. 5. Cross-sectional view. 6. Five configurations demonstrating the five pipe diameters. Create an editable parametric CadQuery model. IMPORTANT: This is only Stage 1. Do not create the four-way connector yet. Prioritise a mechanically plausible universal socket over visual appearance. Do not claim structural performance without testing.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded spacing along X | 130 mm | 90 – 300 |
| Housing outer diameter | 90 mm | 60 – 130 |
| Housing overall length | 110 mm | 80 – 170 |
| Front pipe bore diameter | 54 mm | 40 – 80 |
| Front locking-collar land OD | 94 mm | 70 – 140 |
| Land starts at this height | 92 mm | 50 – 160 |
| Radial jaw slot width | 20 mm | 12 – 34 |
| Jaw slot bottom height | 66 mm | 30 – 120 |
| Jaw slot height | 28 mm | 16 – 40 |
| Rear drain bore | 24 mm | 10 – 48 |
| Stop-ring groove diameter | 60 mm | 34 – 80 |
| Stop-ring groove bottom | 33 mm | 10 – 90 |
| Stop-ring groove height | 6 mm | 3 – 12 |
| Front retainer recess diameter | 86.6 mm | 50 – 120 |
| Front retainer recess depth | 5 mm | 2 – 12 |
| External circlip groove diameter | 84 mm | 50 – 110 |
| Circlip groove bottom | 60 mm | 20 – 120 |
| Circlip groove height | 2.5 mm | 1 – 6 |
| Stop ring outside diameter | 58 mm | 30 – 80 |
| Stop ring inside diameter | 18 mm | 8 – 40 |
| Stop ring thickness | 6 mm | 3 – 12 |
| Split gap for snap assembly | 4 mm | 2 – 10 |
| Jaw pad width | 18 mm | 10 – 30 |
| Jaw pad length / height | 28 mm | 16 – 44 |
| Jaw outer radius | 27 mm | 16 – 40 |
| Jaw concave contact radius | 19 mm | 8 – 32 |
| Guide tongue height | 26 mm | 12 – 40 |
| Scroll drive pin diameter | 8 mm | 4 – 12 |
| Scroll drive pin outer radius | 47.6 mm | 30 – 56 |
| Collar outer diameter | 100 mm | 80 – 140 |
| Collar bore diameter | 90.4 mm | 60 – 120 |
| Collar width | 20 mm | 10 – 44 |
| Scroll groove depth | 2.8 mm | 1 – 5 |
| Knurl notch count | 36 mm | 12 – 72 |
| Retainer outside diameter | 86 mm | 50 – 120 |
| Retainer inside diameter | 54 mm | 26 – 80 |
| Retainer thickness | 5 mm | 2 – 10 |
| Circlip outside diameter | 94 mm | 60 – 130 |
| Circlip inside diameter | 80 mm | 40 – 110 |
| Circlip thickness | 2 mm | 1 – 5 |
| Circlip split gap | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
