Enclosures and housings
MODULOCK V2 - Five-Way Quarter-Turn Connector
- Bounding box
- 102.0 × 102.0 × 81.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Refine the existing MODULOCK V2 model. Keep the current overall design and central housing wherever possible. There are three important requirements: 1. FIVE CONNECTIONS: - Four horizontal female receivers arranged at 90-degree intervals in the same plane. - One additional female receiver facing vertically DOWNWARDS. - No upward-facing connection. 2. QUARTER-TURN LOCKING: Every female receiver must have the original V1-style cylindrical bore, two opposing pin-entry slots and internal circumferential locking tracks. The matching male spigots must have two opposing locking pins and fit these receivers. 3. ASSEMBLY: Create five matching male spigots and demonstrate how they engage with the five female receivers. Show both an assembled view and an exploded view. Keep all five connection interfaces identical. Each must operate independently using the same push-in and approximately 90-degree turn mechanism. Do not introduce adjustable jaws, universal gripping mechanisms or alternative locking systems. Check the geometry for collisions and compatibility. Do not claim mechanical functionality unless verified. Prioritise the correct five-way arrangement and quarter-turn locking geometry over appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Socket Bore Dia | 26 mm | 8 – 56 |
| Socket Outer Dia | 34 mm | 14 – 80 |
| Central Hub Size | 60 mm | 30 – 140 |
| Central Hub Height | 60 mm | 30 – 140 |
| Across-Flats Span | 90 mm | 50 – 240 |
| Socket Bore Depth | 21 mm | 8 – 30 |
| Pin Entry Slot Width | 9 mm | 3 – 24 |
| Pin Entry Slot Depth | 12 mm | 4 – 36 |
| Circumferential Track Width | 6 mm | 2 – 18 |
| Track Radial Depth | 5 mm | 1.5 – 14 |
| Track Sweep Angle | 90 deg | 30 – 180 |
| Spigot Body Dia | 25.4 mm | 6 – 50 |
| Spigot Insert Length | 17 mm | 5 – 40 |
| Spigot Flange Dia | 38 mm | 12 – 100 |
| Spigot Flange Thickness | 6 mm | 2 – 20 |
| Locking Pin Dia | 6 mm | 2 – 16 |
| Locking Pin Protrusion | 4.5 mm | 1 – 10 |
| Pin Offset From Tip | 8 mm | 2 – 30 |
| Spigot Bore Dia | 12 mm | 0 – 44 |
| Explode Distance (0 = assembled) | 0 mm | 0 – 120 |
| Spigot Quarter-Turn (0 = aligned, 90 = locked) | 90 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
