Brackets and mounts
MODULAR VAPE DISPLAY STAND — PREMIUM R1
- Bounding box
- 239.8 × 197.8 × 52.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Premium R1 refinement of the existing AERIS desktop vape organizer. Build a one-piece, support-free FDM display stand within 240×240×240 mm. Retain exactly three vertical tube mod sockets (two Ø24 mm, one Ø26 mm, minimum usable depth 35 mm), a 3×5 grid of Ø25 mm atomizer wells with 6 mm pitch clearance and 12–15 mm depth, a 2×5 grid of Ø10 mm drip-tip wells 6.75 mm deep, and a wide, shallow rounded box-mod tray. Arrange the sockets on the raised rear shelf, atomizers on the middle shelf, drip tips on the front shelf and the box-mod display on the right. Refine the previous design with an asymmetrically clipped perimeter, 4 mm exterior corner radii, gently rounded platform crowns, printable beveled toes, a subtle recessed front reveal, and a rounded tray. Keep a stable flat bottom and one connected solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 239.8 mm | 230 – 240 |
| Overall depth | 197.8 mm | 190 – 198 |
| Base thickness | 8 mm | 6 – 10 |
| External corner radius | 4 mm | 3 – 5 |
| Base and fallback bevel | 0.8 mm | 0.5 – 1.2 |
| Platform upper edge radius | 1.5 mm | 1 – 2 |
| Platform toe chamfer | 1.2 mm | 0.8 – 1.5 |
| Front reveal depth | 0.8 mm | 0.5 – 1.2 |
| Front reveal width | 2 mm | 1.2 – 2.4 |
| Tube platform height | 52 mm | 48 – 56 |
| Atomizer platform height | 37 mm | 35 – 42 |
| Drip tip platform height | 20 mm | 18 – 23 |
| Display tray height | 27 mm | 25 – 30 |
| 23 mm mod slot diameter | 24 mm | 24 – 25 |
| 25 mm mod slot diameter | 26 mm | 26 – 27 |
| Tube slot depth | 38 mm | 36 – 40 |
| Tube slot lead-in depth | 1.6 mm | 1.5 – 2 |
| Tube slot lead-in width | 1 mm | 0.8 – 1.5 |
| Tube slot row start | -79 mm | -82 – -76 |
| Tube slot row position | 78 mm | 76 – 80 |
| Tube slot spacing | 36 mm | 34 – 38 |
| Atomizer well diameter | 25 mm | 25 – 26 |
| Atomizer well depth | 14 mm | 12 – 15 |
| Atomizer grid spacing | 31 mm | 30 – 31.5 |
| Atomizer grid left start | -90 mm | -92 – -88 |
| Atomizer grid front start | -15 mm | -17 – -13 |
| Drip tip well diameter | 10 mm | 10 – 11 |
| Drip tip well depth | 6.75 mm | 6.75 – 7.5 |
| Drip tip column spacing | 20 mm | 19.5 – 20.5 |
| Drip tip row spacing | 18 mm | 17.5 – 18.5 |
| Drip tip grid left start | -95 mm | -98 – -93 |
| Drip tip grid front start | -75 mm | -77 – -73 |
| Small opening chamfer | 1 mm | 0.8 – 1.2 |
| Display tray width | 58 mm | 56 – 62 |
| Display tray length | 121 mm | 114 – 121 |
| Tray retaining wall thickness | 4 mm | 3.5 – 5 |
| Tray recess depth | 3 mm | 2.5 – 4 |
| Tray inside corner radius | 4 mm | 3 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
