Enclosures and housings
Modular Storage Divider System – Improved
- Bounding box
- 175.0 × 60.0 × 200.1 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing CAD model only. Do NOT redesign the product. Do NOT change the overall dimensions. Do NOT change the assembly. Only improve the engineering details. DIVIDER WALL Keep the current wall geometry. Reduce the depth of all reinforcing ribs by approximately 25%. Maintain rib spacing. Blend every rib into the wall using 1–2 mm fillets. Remove all sharp 90° rib intersections. Round the entire top edge of the divider wall with a continuous 3–5 mm radius. Radius all exposed outside edges of the bottom support feet. Keep the slide rails and locking features unchanged. CONNECTOR Redesign only the connector while maintaining approximately the same overall size. Create four identical wall slots positioned 90° apart. Each slot must include: • guide rails • lead-in chamfers • alignment stop • locking surface Inside the connector add: • reinforced screw boss • structural ribs connecting the screw boss to each wall • rounded internal corners • uniform wall thickness • injection molding draft Round all external connector corners. Radius the bottom support feet. Maintain a compact appearance similar to the reference image. THUMB SCREW Do not modify. MANUFACTURING Optimize every feature for injection molding. Use: • uniform wall thickness • proper rib proportions • internal fillets • 2° draft • no unnecessary undercuts The finished CAD should preserve the existing design while improving strength, manufacturability, and appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Height | 200 mm | 50 – 300 |
| Wall Width | 150 mm | 50 – 300 |
| Wall Thickness | 3 mm | 2 – 8 |
| Rib Depth (reduced 25%) | 8 mm | 4 – 20 |
| Rib Width | 4 mm | 2 – 10 |
| Rib Spacing | 25 mm | 10 – 50 |
| Rib Count | 5 | 2 – 10 |
| Rib Blend Fillet | 1.5 mm | 0.5 – 3 |
| Top Edge Radius | 4 mm | 2 – 6 |
| Slide Rail Height | 4 mm | 2 – 8 |
| Slide Rail Width | 3 mm | 2 – 6 |
| Locking Groove Depth | 2 mm | 1 – 5 |
| Locking Groove Width | 4 mm | 3 – 8 |
| Foot Height | 8 mm | 4 – 15 |
| Foot Width | 10 mm | 5 – 20 |
| Foot Length | 12 mm | 5 – 25 |
| Foot Edge Radius | 2 mm | 0.5 – 4 |
| Connector Overall Length | 40 mm | 20 – 60 |
| Connector Overall Width | 40 mm | 20 – 60 |
| Connector Height | 20 mm | 10 – 30 |
| Arm Length (from center) | 18 mm | 10 – 30 |
| Arm Width | 8 mm | 4 – 15 |
| Slot Width | 3.5 mm | 2 – 6 |
| Slot Depth | 12 mm | 5 – 20 |
| Guide Rail Groove Depth | 0.8 mm | 0.5 – 2 |
| Slot Lead-in Chamfer | 0.5 mm | 0.2 – 1.5 |
| Screw Boss Diameter | 12 mm | 8 – 20 |
| Screw Boss Height | 6 mm | 3 – 10 |
| Thread Diameter (M6) | 6 mm | 4 – 10 |
| Internal Rib Thickness | 1.5 mm | 1 – 3 |
| Draft Angle (degrees) | 2 deg | 0 – 5 |
| External Corner Radius | 2 mm | 1 – 4 |
| Grip Diameter | 14 mm | 10 – 20 |
| Grip Length | 18 mm | 10 – 30 |
| Shoulder Diameter | 8 mm | 6 – 12 |
| Shoulder Length | 4 mm | 2 – 8 |
| Thread Length | 12 mm | 8 – 20 |
| Exploded Layout Gap | 30 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox