Enclosures and housings
Modular Storage Cabinet
- Bounding box
- 420 × 76 × 230 mm
- Engine
- 3D Printing B-rep
- Parameters
- 34
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, realistic, 3D-printable cabinet / storage unit based on the following specifications. **Overall dimensions:** - Width: 420 mm - Height: 230 mm - Depth: 70 mm **Layout (IMPORTANT — follow exactly):** LEFT SECTION: - A large, completely OPEN rectangular space in the lower/middle-left area. - Inside this open space, add a horizontal table-like shelf attached firmly to the cabinet walls. - Above this table, add two smaller horizontal shelves/compartments positioned relatively HIGH. - The open space and table are positioned toward the LEFT, NOT in the center. RIGHT SECTION: - A tall vertical cabinet section with multiple compartments. - Include vertical dividers and horizontal shelves. BOTTOM SECTION: - Include several drawers and cabinet compartments along the bottom. - Add simple rectangular drawer fronts. GENERAL DESIGN: - Modern, simple rectangular geometry. - Flat surfaces, straight edges, no decorative curves. - Thin but strong walls suitable for 3D printing. - The structure must be hollow wherever compartments or openings are specified. - Do NOT create one solid rectangular block. - Do NOT fill in the large open space. - The table/shelf must be structurally connected to the cabinet. - The shelves must be real geometry, not textures. **3D PRINTING REQUIREMENTS:** - Export as STL. - Use millimeters. - Make the model watertight and manifold. - Split into only 2–4 large interlocking parts if necessary. - Add alignment pins and matching holes between parts. - Minimize the need for glue. - Ensure every part fits within a 3D printer build volume. The final result must be a functional, dimensionally accurate 3D model, not just a visual concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 420 mm | 200 – 600 |
| Overall height | 230 mm | 100 – 500 |
| Overall depth | 70 mm | 30 – 200 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Left carcass width | 240 mm | 150 – 400 |
| Bottom of open bay | 55 mm | 10 – 150 |
| Top of open bay | 227 mm | 100 – 229 |
| Vertical divider X | 330 mm | 250 – 410 |
| Right shelf 1 height | 60 mm | 20 – 200 |
| Right shelf 2 height | 120 mm | 40 – 210 |
| Right shelf 3 height | 180 mm | 60 – 220 |
| Table shelf width | 210 mm | 100 – 300 |
| Table shelf thickness | 8 mm | 3 – 15 |
| Table shelf depth | 60 mm | 30 – 66 |
| Table shelf height | 140 mm | 80 – 210 |
| Upper shelf width | 90 mm | 40 – 200 |
| Upper shelf thickness | 6 mm | 3 – 12 |
| Upper shelf depth | 60 mm | 30 – 66 |
| Upper shelf A height | 172 mm | 100 – 225 |
| Upper shelf B height | 202 mm | 120 – 227 |
| Upper shelf A left X | 15 mm | 3 – 150 |
| Upper shelf B left X | 120 mm | 3 – 220 |
| Drawer width | 130 mm | 50 – 200 |
| Drawer height | 45 mm | 20 – 100 |
| Drawer depth | 55 mm | 20 – 66 |
| Drawer wall thickness | 3 mm | 1.2 – 6 |
| Drawer 1 left X | 2 mm | 0 – 150 |
| Drawer 2 left X | 136 mm | 0 – 250 |
| Drawer bottom Z | 4 mm | 0 – 60 |
| Door width | 100 mm | 40 – 200 |
| Door height | 45 mm | 20 – 100 |
| Door thickness | 8 mm | 3 – 15 |
| Door left X | 300 mm | 250 – 400 |
| Door bottom Z | 4 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,