Brackets and mounts
Modular Steel Access Ramp 1:10
- Bounding box
- 2780.5 × 1000.0 × 1370.1 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a modular industrial steel ramp assembly with an incline slope of 1:10. Total ramp run length is 2500 mm, width is 1000 mm, and elevation height is 250 mm. Features include a chamfered bottom approach plate, a perforated anti-slip walking surface, 75 mm high side edge guards, and a rectangular hollow section steel subframe with reinforcing gussets. Attach continuous dual-rail safety handrails on both sides mounted on vertical posts with flanged base plates. Ensure all sharp corners have small fillets and clean engineering geometry suitable for sheet metal and tubular fabrication.
Parameters
| Name | Value | Range |
|---|---|---|
| Ramp Run | 2500 mm | 1000 – 5000 |
| Ramp Width | 1000 mm | 600 – 2000 |
| Rise Height | 250 mm | 50 – 800 |
| Deck Plate Length | 2512 mm | 1000 – 5100 |
| Deck Plate Thickness | 4 mm | 2 – 10 |
| Perforation Diameter | 18 mm | 6 – 30 |
| Perforation Pitch | 100 mm | 50 – 200 |
| Approach Plate Length | 250 mm | 100 – 600 |
| Approach Plate Thickness | 6 mm | 3 – 16 |
| Leading Edge Chamfer | 20 mm | 5 – 80 |
| Edge Guard Height | 75 mm | 25 – 200 |
| Edge Guard Thickness | 4 mm | 2 – 12 |
| RHS Width | 40 mm | 20 – 100 |
| RHS Height | 80 mm | 30 – 200 |
| RHS Wall Thickness | 4 mm | 2 – 12 |
| Crossmember Count | 5 mm | 2 – 12 |
| Gusset Leg Size | 100 mm | 40 – 250 |
| Gusset Thickness | 6 mm | 3 – 16 |
| Handrail Tube OD | 42 mm | 20 – 90 |
| Handrail Tube Wall | 3 mm | 1.5 – 10 |
| Handrail Length | 2600 mm | 1000 – 5200 |
| Top Rail Above Deck | 1000 mm | 600 – 1400 |
| Mid Rail Above Deck | 500 mm | 200 – 900 |
| Posts Per Side | 3 mm | 2 – 8 |
| Base Plate Size | 100 mm | 50 – 250 |
| Base Plate Thickness | 8 mm | 3 – 25 |
| Base Plate Bolt Dia | 10 mm | 5 – 24 |
| General Deburr Fillet | 3 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl