Brackets and mounts
Modular Pusher Fuselage Section
- Bounding box
- 100 × 200 × 85 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a modular central fuselage section for a pusher RC plane, 200mm length, streamlined aerodynamic teardrop cross-section (width 100mm, height 85mm), hollowed inside with 1.5mm wall thickness. Add a rear circular motor mount diameter 30mm at the back end and open front end for joining.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 200 mm | 50 – 400 |
| Max width | 100 mm | 30 – 200 |
| Max height | 85 mm | 30 – 200 |
| Wall thickness | 1.5 mm | 1.2 – 5 |
| Bottom flat width | 10 mm | 2 – 40 |
| Teardrop top tip radius | 4 mm | 2 – 20 |
| Motor mount diameter | 30 mm | 10 – 80 |
| Rear motor boss protrusion | 3 mm | 0 – 10 |
| Shaft/air hole diameter | 8 mm | 2 – 20 |
| Motor screw clearance diameter | 3.4 mm | 2 – 6 |
| Motor screw bolt circle diameter | 20 mm | 10 – 50 |
| Rear bulkhead thickness | 4 mm | 1.5 – 10 |
| Front inner chamfer | 0.5 mm | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl