Enclosures and housings
Modular Organizer Multi-Part
- Bounding box
- 172.0 × 92.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 44
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, fully editable CAD model of a modular organizer for PLA/FDM printing. BASE: Outer dimensions: 92 × 172 mm. Base thickness: 10 mm. Inner floor area: 82 × 162 mm. Perimeter wall thickness: 5 mm. Perimeter wall height above the base: 8 mm. Total height: 18 mm. Round the outer corners and edges without changing the specified overall dimensions. BASE MAGNET GRID: Create 4 invisible reference rectangles. Each rectangle is 81 × 40 mm. Arrange the 4 rectangles in a 4 × 1 layout. Together, the 4 rectangles form a 160 × 80 mm area. Place one magnet pocket at each corner of each rectangle. Exactly 16 magnet pockets total. Pocket size: Ø9.5 × 3 mm. Center the complete 160 × 80 mm layout inside the 82 × 162 mm inner base area. Magnets are positioned 1 mm below the top surface of the base. Reference rectangles are construction geometry only and must not be visible or printed. MODULE 1: Outer dimensions: 80 × 80 × 80 mm. Open top and hollow interior. Wall thickness: 7 mm. No divider. Four magnet pockets, one near each bottom corner. Pocket size: Ø9.5 × 3 mm. Leave 1 mm of PLA between the bottom exterior surface and each magnet pocket. MODULE 2: Outer dimensions: 80 × 80 × 80 mm. Open top and hollow interior. Wall thickness: 7 mm. One centered divider, 7 mm thick, creating two equal compartments. Four magnet pockets, one near each bottom corner. Pocket size: Ø9.5 × 3 mm. Leave 1 mm of PLA between the bottom exterior surface and each magnet pocket. MODULE 3: Outer dimensions: 40 × 80 × 70 mm. Open top and hollow interior. Wall thickness: 7 mm. No divider. Four magnet pockets, one near each bottom corner. Pocket size: Ø9.5 × 3 mm. Leave 1 mm of PLA between the bottom exterior surface and each magnet pocket. MODULE 4: Outer dimensions: 40 × 80 × 70 mm. Open top and hollow interior. Wall thickness: 7 mm. One centered divider, 7 mm thick, creating two equal compartments. Four magnet pockets, one near each bottom corner. Pocket size: Ø9.5 × 3 mm. Leave 1 mm of PLA between the bottom exterior surface and each magnet pocket. GENERAL: Create the base and all four modules as separate CAD bodies. Place all five bodies side-by-side with clear gaps between them. Do not stack, overlap or connect the bodies. Use solid, printable PLA/FDM geometry. Do not add any features that are not specified. Make all geometry suitable for STEP and STL export.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 10 mm | 1 – 50 |
| Base Outer Length | 172 mm | 80 – 300 |
| Base Outer Width | 92 mm | 50 – 200 |
| Base Plate Thickness | 10 mm | 5 – 20 |
| Base Perimeter Wall Thickness | 5 mm | 2 – 10 |
| Base Wall Height Above Plate | 8 mm | 2 – 20 |
| Base Outer Corner Fillet | 3 mm | 0 – 8 |
| Base Top Edge Fillet | 1 mm | 0 – 4 |
| Base Magnet Pocket Diameter | 9.5 mm | 3 – 15 |
| Base Magnet Pocket Depth | 3 mm | 1 – 8 |
| Base Pocket Grid Length (X) | 160 mm | 40 – 200 |
| Base Pocket Grid Width (Y) | 80 mm | 20 – 120 |
| Base Pocket Count X | 4 mm | 1 – 8 |
| Base Pocket Count Y | 4 mm | 1 – 8 |
| Module 1 Outer Length | 80 mm | 20 – 200 |
| Module 1 Outer Width | 80 mm | 20 – 200 |
| Module 1 Outer Height | 80 mm | 20 – 200 |
| Module 1 Wall Thickness | 7 mm | 2 – 20 |
| Module 1 Pocket Diameter | 9.5 mm | 3 – 15 |
| Module 1 Pocket Depth | 3 mm | 1 – 8 |
| Module 1 Pocket Corner Offset | 10 mm | 5 – 30 |
| Module 2 Outer Length | 80 mm | 20 – 200 |
| Module 2 Outer Width | 80 mm | 20 – 200 |
| Module 2 Outer Height | 80 mm | 20 – 200 |
| Module 2 Wall Thickness | 7 mm | 2 – 20 |
| Module 2 Pocket Diameter | 9.5 mm | 3 – 15 |
| Module 2 Pocket Depth | 3 mm | 1 – 8 |
| Module 2 Pocket Corner Offset | 10 mm | 5 – 30 |
| Module 2 Divider Thickness | 7 mm | 2 – 20 |
| Module 3 Outer Length | 40 mm | 20 – 200 |
| Module 3 Outer Width | 80 mm | 20 – 200 |
| Module 3 Outer Height | 70 mm | 20 – 200 |
| Module 3 Wall Thickness | 7 mm | 2 – 20 |
| Module 3 Pocket Diameter | 9.5 mm | 3 – 15 |
| Module 3 Pocket Depth | 3 mm | 1 – 8 |
| Module 3 Pocket Corner Offset | 10 mm | 5 – 30 |
| Module 4 Outer Length | 40 mm | 20 – 200 |
| Module 4 Outer Width | 80 mm | 20 – 200 |
| Module 4 Outer Height | 70 mm | 20 – 200 |
| Module 4 Wall Thickness | 7 mm | 2 – 20 |
| Module 4 Pocket Diameter | 9.5 mm | 3 – 15 |
| Module 4 Pocket Depth | 3 mm | 1 – 8 |
| Module 4 Pocket Corner Offset | 10 mm | 5 – 30 |
| Module 4 Divider Thickness | 7 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no