Brackets and mounts
Modular FPV Whoop Drone Frame (Meteor75 Pro II style)
- Bounding box
- 106.0 × 106.0 × 40.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a lightweight modular FPV drone frame for the BETAFPV Meteor75 Pro II. Requirements: - Flight controller mounting: 26x26mm - Original 1S flight controller compatibility - Original motor mount: 3x M1.4, 6.6mm mounting circle - Adjustable wheelbase - Front-mounted DJI O4 Wide camera - Adjustable camera tilt angle - Secure 1S battery mounting - Replaceable arms - Reinforced motor mounting areas - Rounded edges - Separate printable components Make all important dimensions parametric and editable. Do not invent camera dimensions. Make camera dimensions adjustable. Export STL and 3MF.
Parameters
| Name | Value | Range |
|---|---|---|
| FC screw hole spacing | 25.5 mm | 20 – 30 |
| FC screw hole diameter | 2 mm | 1.5 – 3 |
| Main plate thickness | 2 mm | 1.2 – 4 |
| Diagonal wheelbase | 80 mm | 65 – 110 |
| Arm strut thickness | 2.5 mm | 1.5 – 4 |
| Propeller guard inner diameter | 47 mm | 40 – 60 |
| Guard ring height | 10 mm | 6 – 18 |
| Motor mounting circle PCD | 6.6 mm | 5 – 9 |
| Motor screw hole diameter | 1.5 mm | 1.2 – 2 |
| Motor center hole diameter | 5.5 mm | 4 – 8 |
| Camera width | 19.5 mm | 14 – 25 |
| Camera height | 19 mm | 14 – 25 |
| Camera depth | 18 mm | 10 – 30 |
| Camera tilt angle | 25 deg | 0 – 60 |
| Battery compartment width | 17.5 mm | 10 – 25 |
| Battery compartment height | 8 mm | 5 – 15 |
| Battery tray length | 38 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl