Brackets and mounts
Modular FPV Drone Frame (Exploded)
- Bounding box
- 453 × 60 × 19.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 48
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a lightweight modular FPV drone frame for the BETAFPV Meteor75 Pro II. Requirements: - Flight controller mounting: 26x26mm - Original 1S flight controller compatibility - Original motor mount: 3x M1.4, 6.6mm mounting circle - Adjustable wheelbase - Front-mounted DJI O4 Wide camera - Adjustable camera tilt angle - Secure 1S battery mounting - Replaceable arms - Reinforced motor mounting areas - Rounded edges - Separate printable components Make all important dimensions parametric and editable. Do not invent camera dimensions. Make camera dimensions adjustable. Export STL and 3MF.
Parameters
| Name | Value | Range |
|---|---|---|
| Gap between exploded parts | 8 mm | 2 – 40 |
| Frame plate width | 60 mm | 40 – 120 |
| Frame plate thickness | 2.5 mm | 1.5 – 5 |
| Frame plate corner radius | 3 mm | 0.5 – 10 |
| FC mounting hole spacing | 26 mm | 20 – 40 |
| FC screw clearance | 2.2 mm | 1.5 – 4 |
| Battery strap slot length | 16 mm | 8 – 30 |
| Battery strap slot width | 3.2 mm | 1.5 – 6 |
| Battery strap slot Y offset | 20 mm | 5 – 28 |
| Arm adjustment slot length | 12 mm | 6 – 20 |
| Arm adjustment slot width | 3.2 mm | 1.5 – 6 |
| Arm slot radial center offset | 20 mm | 10 – 28 |
| Arm length | 35 mm | 20 – 60 |
| Arm width | 8 mm | 4 – 15 |
| Arm thickness | 2.5 mm | 1.5 – 5 |
| Arm corner radius | 2 mm | 0.5 – 4 |
| Arm root slot length | 8 mm | 4 – 15 |
| Arm root slot width | 3 mm | 1.2 – 6 |
| Motor pad size | 10 mm | 6 – 16 |
| Motor pad corner radius | 2 mm | 0.5 – 4 |
| Motor mounting circle diameter | 6.6 mm | 4 – 12 |
| Motor screw clearance | 1.5 mm | 1 – 3 |
| Motor hole count | 3 mm | 3 – 4 |
| Camera bracket width | 22 mm | 15 – 40 |
| Camera bracket depth | 22 mm | 15 – 40 |
| Camera bracket side height | 18 mm | 12 – 30 |
| Camera base thickness | 2.5 mm | 1.5 – 5 |
| Camera bracket wall thickness | 1.5 mm | 1.2 – 4 |
| Camera cavity width | 16 mm | 8 – 30 |
| Camera cavity height | 12 mm | 6 – 24 |
| Camera cavity depth | 12 mm | 6 – 24 |
| Camera tilt angle | 20 deg | -40 – 40 |
| Tilt slot half-range | 25 deg | 10 – 40 |
| Pivot height above bed | 10.5 mm | 6 – 25 |
| Pivot screw clearance | 2.2 mm | 1.5 – 4 |
| Tilt lock slot width | 2.5 mm | 1.5 – 4 |
| Tilt slot radius from pivot | 6 mm | 3 – 10 |
| Camera base mount hole diameter | 2.2 mm | 1.5 – 4 |
| Camera base mount hole X spacing | 6 mm | 3 – 12 |
| Battery plate length | 30 mm | 20 – 60 |
| Battery plate width | 18 mm | 12 – 40 |
| Battery plate thickness | 2 mm | 1.2 – 4 |
| Battery plate corner radius | 2.5 mm | 0.5 – 6 |
| Battery strap slot length | 22 mm | 10 – 40 |
| Battery strap slot width | 3.2 mm | 1.5 – 6 |
| Battery strap slot Y offset | 5 mm | 2 – 10 |
| Battery plate mount hole diameter | 2.2 mm | 1.5 – 4 |
| Battery plate mount hole X offset | 11 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl