Enclosures and housings
Modular Electronics Enclosure
- Bounding box
- 243.0 × 145.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
1. Project Goal Design a modular, educational electronics game for children (ages 8+). The system will allow users to build 50+ different circuits, teaching them about electronics through light, sound, and touch-based controls, similar to products like the "Science Mad Circuit Lab" . The core design will be a two-plate enclosure (top and bottom) with specific mechanical features. 2. Mechanical Design The device consists of two interlocking rectangular plates: a Top Plate and a Bottom Plate. Dimensions for Both Plates: 238mm (L) x 140mm (W). Top Plate: Has a total height/depth of 70mm and a wall thickness of 2.5mm. Top plate will have chamfered edges Component Holes: 7mm diameter holes for female sockets to connect components. 3 columbs of 6 sets of 7mm holes. each set of holes will be 30mm apart. Features for Manufacturing: . A slot on the bottom of the top plate allows it to be secured to the bottom plate
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 238 mm | 150 – 400 |
| Plate Width | 140 mm | 50 – 250 |
| Top Plate Height | 70 mm | 20 – 150 |
| Wall Thickness | 2.5 mm | 1 – 5 |
| Hole Diameter | 7 mm | 3 – 15 |
| Hole Spacing | 30 mm | 10 – 80 |
| Hole Columns (across width) | 3 | 1 – 10 |
| Hole Rows (along length) | 6 | 1 – 20 |
| Bottom Plate Thickness | 2.5 mm | 1 – 5 |
| Groove Width | 5 mm | 2 – 10 |
| Groove Depth | 3 mm | 1 – 6 |
| Groove Inset from Edge | 5 mm | 2 – 10 |
| Chamfer Radius | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox