Brackets and mounts
Modular Drawer Storage with Water Tank
- Bounding box
- 1083 × 1322 × 325 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design a modular vehicle drawer storage system with an integrated rear water tank using 3030 aluminum extrusion framing and phenolic plywood panels. 1. Overall Outer Frame (3030 Aluminum Extrusion - Grey/Silver): • Build a rectangular box frame using 30mm x 30mm T-slot aluminum extrusion profiles. • Overall external dimensions: 1083 mm wide (X-axis), 1310 mm long (Y-axis), and 310 mm high (Z-axis). • Include vertical corner posts, top and bottom perimeter rails, and a central vertical divider post at the front and rear faces to split the unit into two equal side-by-side bays. • Add a longitudinal top center rail running down the middle from front to back (Y-axis) separating the left and right top deck panels. • Add an intermediate vertical side post along the left side wall near the rear section, aligning with the front face of the rear water tank compartment. 2. Side-by-Side Storage Drawers (Front/Main Section): • Create two equal-width rectangular pull-out drawers sitting side-by-side within the left and right front bays of the 3030 frame. • Drawer faces: Fit flat brown phenolic plywood panels flush inside the front extrusion openings. • Latches: Cut out or mount a small, vertically oriented black paddle latch/finger pull near the top-center of each of the two front drawer faces. 3. Top Deck & Side Cladding (Phenolic Plywood - Brown): • Enclose the left and right exterior side walls with brown phenolic plywood panels fitted flush into the 3030 extrusion frame. • Cover the top surface with brown phenolic plywood panels separated by the central longitudinal extrusion rail. • Top-left cutout: Leave an open rectangular recess on the rear-left corner of the top deck directly above the water tank area for top access. 4. Rear Integrated Water Tank (Black): • Position a rectangular black water tank at the back section of the assembly, tucked behind the drawer bays. • Tank dimensions: 1065 mm wide (X-axis), 230 mm deep (Y-axis), and 285 mm high (Z-axis). • Center the tank width-wise (1065 mm) inside the 1083 mm frame width, flush with the rear face and sitting on the base plane.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width X | 1083 mm | 600 – 1600 |
| Overall length Y | 1310 mm | 600 – 2000 |
| Overall height Z | 310 mm | 150 – 600 |
| Extrusion profile size | 30 mm | 20 – 45 |
| T-slot opening width | 12 mm | 6 – 16 |
| T-slot depth | 2.5 mm | 1 – 5 |
| Drawer front width | 480 mm | 200 – 800 |
| Drawer front height | 250 mm | 100 – 420 |
| Drawer depth | 900 mm | 300 – 1200 |
| Drawer body wall | 12 mm | 4 – 20 |
| Drawer body clearance | 10 mm | 2 – 30 |
| Latch width | 40 mm | 15 – 80 |
| Latch height | 100 mm | 30 – 200 |
| Latch depth | 20 mm | 8 – 40 |
| Panel thickness | 18 mm | 6 – 30 |
| Deck panel width | 496 mm | 100 – 800 |
| Deck panel length | 1280 mm | 300 – 1500 |
| Rear-left tank access cutout depth | 230 mm | 0 – 600 |
| Tank width | 1065 mm | 300 – 1100 |
| Tank depth | 230 mm | 80 – 600 |
| Tank height | 285 mm | 100 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
