Enclosures and housings
Modular Desk Organizer — Base + 2 Modules
- Bounding box
- 210.0 × 110.0 × 111.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a premium modular desk organizer optimized for PLA FDM printing. BASE 210 × 110 mm, 10 mm main thickness + 1 mm raised top surface. 16 precisely positioned magnet cavities matching the modules. Magnet cavity structure from bottom to top: 2 mm PLA → 8×3 mm magnet cavity → 1 mm PLA. Magnet positions must exactly match the module magnets. Rounded corners and subtle ribbed outer walls, without changing dimensions. MODULE 1 100 × 100 × 100 mm, rounded cube, open top. 8 mm walls, 11 mm total bottom. 4 corner magnet cavities, exactly matching the corresponding base magnets. Bottom structure: 1 mm PLA → 8×3 mm magnet cavity → remaining solid bottom material. Ribbed exterior and rounded edges. MODULE 2 100 × 100 × 80 mm, same rounded open design. Divided into 2 equal compartments by a central wall. 8 mm walls, 11 mm bottom. 4 magnet cavities exactly matching the corresponding base magnets. Bottom structure: 1 mm PLA → 8×3 mm magnet cavity → remaining solid material. Ribbed exterior and rounded edges. FINAL All module magnets must align exactly with the corresponding base magnets. When assembled, there should be 2 mm total PLA between opposing magnets. Strong but comfortable magnetic attachment. Optimize tolerances, strength and geometry for clean PLA FDM printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 210 mm | 120 – 400 |
| Base Depth | 110 mm | 60 – 300 |
| Base Main Thickness | 10 mm | 3 – 30 |
| Raised Top Thickness | 1 mm | 0.4 – 6 |
| Raised Top Inset | 2 mm | 0 – 20 |
| Module 1 Length | 100 mm | 40 – 200 |
| Module 1 Depth | 100 mm | 40 – 200 |
| Module 1 Height | 100 mm | 30 – 250 |
| Module 2 Length | 100 mm | 40 – 200 |
| Module 2 Depth | 100 mm | 40 – 200 |
| Module 2 Height | 80 mm | 30 – 250 |
| Wall Thickness | 8 mm | 2 – 20 |
| Module Bottom Thickness | 11 mm | 3 – 30 |
| Module 2 Divider Wall | 8 mm | 2 – 20 |
| Magnet Diameter | 8 mm | 3 – 20 |
| Magnet Height | 3 mm | 1 – 10 |
| Magnet Inset From Module Edge | 15 mm | 5 – 45 |
| PLA Cover Over Magnet | 1 mm | 0.4 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no