Enclosures and housings
Modular Car Organizer
- Bounding box
- 230.0 × 156.0 × 156.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
i need a compact case for the trunk of my car. it does not need to have a cover. it needs to be no greater than 3 inches tall. it needs to be modular. all modules the same size even if it means that i am wasting space in some of the modules. modules need to be able to be added and removed using dove tails. big items need slots on each side for 2 20mm wide straps. and all items need about 1.5mm of clearance so items fit perfectly and have finger grooves on each side so i am able to remove items. module 1 will hold a fanttik x8 apex tire inflator. the dimensions are 200.5mm x 63.5mm x 63.5mm. also need a space for 18 inch air tube in that same module that can curve but no sharp kinks. air tube has a diameter of 10mm. Module 2 will hold a fanttik s2 pro max that have the dimensions of 61.4mm x 61.4mm x 213.8mm. Module 3 will hold a fanttik x10 tiny bike pump. the dimensions are 72mm x 59mm x 30mm. Module 4 needs to have space for 20 standard 1/4 inch hex bits, 2 x 18inch usb-c cables that are coiled (separate slots). and a wide slot for the x8 tire inflator accessories. Also all modules should have an external retaining tab just to keep them locked in place so they don't come apart. Also each modules should have male dove tails on left and top side and female dove tail on bottom and right side.
Parameters
| Name | Value | Range |
|---|---|---|
| Module length | 230 mm | 200 – 300 |
| Module width | 75 mm | 60 – 120 |
| Module height | 75 mm | 50 – 100 |
| Wall thickness | 3 mm | 1.5 – 6 |
| Clearance | 1.5 mm | 0 – 3 |
| Dovetail depth | 6 mm | 3 – 12 |
| Dovetail base width | 12 mm | 6 – 20 |
| Dovetail angle | 60 deg | 30 – 90 |
| Tab length | 20 mm | 5 – 40 |
| Tab width | 10 mm | 5 – 20 |
| Tab height | 3 mm | 1 – 6 |
| Tab X offset (from center) | 100 mm | -100 – 100 |
| Finger groove radius | 5 mm | 2 – 10 |
| Finger groove depth | 2 mm | 1 – 4 |
| Strap slot width | 20 mm | 10 – 30 |
| Strap slot length | 180 mm | 50 – 200 |
| Inflator (X8) length | 200.5 mm | 150 – 250 |
| Inflator (X8) width | 63.5 mm | 50 – 100 |
| Inflator (X8) height | 63.5 mm | 50 – 100 |
| Air tube diameter | 10 mm | 5 – 15 |
| S2 Pro Max length | 213.8 mm | 150 – 300 |
| S2 Pro Max width | 61.4 mm | 50 – 100 |
| S2 Pro Max height | 61.4 mm | 50 – 100 |
| Bike pump (X10) length | 72 mm | 50 – 150 |
| Bike pump (X10) width | 59 mm | 40 – 100 |
| Bike pump (X10) height | 30 mm | 20 – 60 |
| Number of hex bits | 20 | 1 – 30 |
| Hex bit diameter | 6.35 mm | 3 – 10 |
| Bit storage depth | 25 mm | 10 – 50 |
| USB‑C coil diameter | 30 mm | 20 – 50 |
| USB‑C coil height | 10 mm | 5 – 20 |
| Accessory slot length | 100 mm | 50 – 200 |
| Accessory slot width | 50 mm | 30 – 100 |
| Accessory slot depth | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no