3D preview of Model 3 trunk release housing w/ camera washer
Loading the interactive model…
Interactive 3D model of Model 3 trunk release housing w/ camera washer

Enclosures and housings

Model 3 trunk release housing w/ camera washer

1 views
Bounding box
138 × 72 × 15 mm
Engine
3D Printing B-rep
Parameters
28
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Tesla Model 3 trunk release handle housing with rearview camera washer

Parameters

NameValueRange
Housing width120 mm80 – 200
Housing height54 mm30 – 120
Housing thickness8 mm4 – 20
Corner radius9 mm2 – 24
Front face chamfer1.2 mm0.2 – 3
Release recess width52 mm20 – 100
Release recess height22 mm10 – 48
Release recess depth4 mm1 – 7
Release recess centre X-28 mm-60 – 60
Raised bezel width3 mm1.2 – 6
Raised bezel height1.2 mm0.4 – 3
Camera centre X34 mm-60 – 80
Camera boss diameter26 mm14 – 44
Camera boss height5 mm0.5 – 12
Lens aperture12.4 mm6 – 20
Lens glass recess diameter17 mm8 – 26
Lens glass recess depth1.5 mm0.4 – 4
Nozzle boss diameter8 mm4 – 14
Nozzle boss height7 mm3 – 16
Nozzle bore diameter2 mm1 – 4
Spray tilt toward lens10 deg0 – 45
Button pad thickness4 mm1.5 – 8
Button side clearance0.3 mm0.15 – 0.6
Button sink into recess0.5 mm0.2 – 1.5
Screw inset from edge8 mm4 – 20
Mounting hole diameter4.5 mm2 – 8
Counterbore diameter7.5 mm4 – 14
Counterbore depth2 mm0.5 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Oval Safety Snap Carabiner46.5 × 12.0 × 80.0 mmPrecision

Oval Safety Snap Carabiner

Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.

STEPSTLGLB7 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS