Enclosures and housings
Mobile X-Ray Prototype Assembly
- Bounding box
- 129.0 × 127.7 × 316.1 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
mobile xray prototype scale factor = 0.381 for all parts. {Scaled dimension}=Real dimension} x 0.381 Body: 305 × 210 × 305 mm Large wheels: Ø133 × 19 mm Front wheels: Ø57 × 15 mm Vertical column: 57 × 57 × 457 mm Horizontal arm: 305 × 38 × 38 mm Tube housing: 114 × 95 × 95 mm Collimator: 95 × 84 × 46 mm Handle: 229 × 19 × 19 mm Control panel: 114 × 76 × 19 mm make the rough sketch with these
Parameters
| Name | Value | Range |
|---|---|---|
| Base Body Width (X) | 116.2 mm | 60 – 200 |
| Base Body Depth (Y) | 80 mm | 50 – 160 |
| Base Body Height (Z) | 116.2 mm | 50 – 200 |
| Rear Wheel Diameter | 50.7 mm | 25 – 110 |
| Rear Wheel Width | 7.2 mm | 3 – 25 |
| Rear Axle Position (from body center) | -22 mm | -40 – 0 |
| Front Caster Diameter | 21.7 mm | 10 – 60 |
| Front Caster Width | 5.7 mm | 2 – 20 |
| Front Caster Position (from body center) | 22 mm | 0 – 40 |
| Front Caster Track (center-to-center) | 70 mm | 30 – 120 |
| Vertical Column Cross-Section | 21.7 mm | 10 – 60 |
| Vertical Column Height | 174.1 mm | 80 – 320 |
| Column Position (from body center) | -25 mm | -38 – 0 |
| Horizontal Arm Length | 116.2 mm | 50 – 200 |
| Horizontal Arm Width | 14.5 mm | 6 – 45 |
| Horizontal Arm Height | 14.5 mm | 6 – 45 |
| Tube Housing Width (X) | 43.4 mm | 20 – 90 |
| Tube Housing Depth (Y) | 36.2 mm | 20 – 90 |
| Tube Housing Height (Z) | 36.2 mm | 20 – 90 |
| Collimator Width (X) | 36.2 mm | 15 – 80 |
| Collimator Depth (Y) | 32 mm | 15 – 80 |
| Collimator Height (Z) | 17.5 mm | 8 – 50 |
| Push Handle Length | 87.2 mm | 40 – 160 |
| Push Handle Diameter | 7.2 mm | 4 – 20 |
| Handle Height Below Column Top | 45 mm | 10 – 120 |
| Control Panel Width | 43.4 mm | 20 – 90 |
| Control Panel Height | 29 mm | 12 – 70 |
| Control Panel Thickness | 7.2 mm | 3 – 20 |
| Panel Center Above Body Top | 65 mm | 10 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no