Enclosures and housings
MK1 Exoskeleton Arm Assembly (Exploded)
- Bounding box
- 1096.1 × 150.1 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a human-wearable MK1 powered exoskeleton arm as a multi-part CAD assembly. The design must include separate parts for the shoulder, upper arm, elbow, forearm, and wrist. The upper-arm and forearm armour must be hollow and removable. Each armour section must open using hinges like a clamshell so a human arm can be placed inside, then close and lock using mechanical latches or locking pins. Include a visible mechanical elbow joint with realistic bending clearance. Keep the outer armour separate from the inner mechanical support frame. Leave space inside for servos, motors, wiring, batteries, and electronics. Create the shoulder, upper-arm armour, elbow mechanism, forearm armour, hinges, latches, and inner support as separate editable components. Do not make the entire arm one solid piece. Keep the design in the original MK1 suit style: rounded, layered, mechanical armour.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 80 mm | 20 – 300 |
| Shoulder Diameter | 150 mm | 50 – 300 |
| Shoulder Thickness | 80 mm | 30 – 150 |
| Shoulder Bore Diameter | 20 mm | 5 – 50 |
| Upper Arm Length | 300 mm | 150 – 500 |
| Upper Arm Width | 120 mm | 60 – 200 |
| Upper Arm Depth | 80 mm | 40 – 150 |
| Upper Arm Wall Thickness | 5 mm | 2 – 20 |
| Forearm Length | 250 mm | 120 – 400 |
| Forearm Width | 100 mm | 50 – 180 |
| Forearm Depth | 70 mm | 40 – 130 |
| Forearm Wall Thickness | 5 mm | 2 – 20 |
| Inner Support Upper Length | 280 mm | 140 – 450 |
| Inner Support Upper Width | 100 mm | 50 – 180 |
| Inner Support Upper Height | 60 mm | 30 – 120 |
| Inner Support Upper Wall Thickness | 6 mm | 2 – 15 |
| Inner Support Forearm Length | 230 mm | 120 – 380 |
| Inner Support Forearm Width | 80 mm | 40 – 150 |
| Inner Support Forearm Height | 50 mm | 20 – 100 |
| Inner Support Forearm Wall Thickness | 5 mm | 2 – 15 |
| Elbow Diameter | 100 mm | 40 – 200 |
| Elbow Thickness | 60 mm | 20 – 120 |
| Wrist Diameter | 60 mm | 20 – 120 |
| Wrist Thickness | 40 mm | 15 – 80 |
| Hinge Length | 30 mm | 15 – 60 |
| Hinge Width | 20 mm | 10 – 40 |
| Hinge Thickness | 10 mm | 4 – 20 |
| Latch Length | 40 mm | 20 – 80 |
| Latch Width | 15 mm | 8 – 30 |
| Latch Thickness | 10 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox