Enclosures and housings
Minnow Split Lure Half Pair
- Bounding box
- 252.1 × 100.2 × 32.5 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a hard body minnow stick fishing lure split into two symmetrical halves (left and right) for printing and gluing together, with an open internal cavity profile. The lure body must be slender, hydrodynamic, and measuring approximately 120mm in length. Design an internal weight transfer or ballast chamber located exclusively in the tail section for distance casting stability. Include three precise internal wire-through eyelet slots: one at the nose, one at the belly center, and one at the tail. The internal mating surfaces of both halves must feature alignment pins and matching holes for perfect registration during assembly. Export as a solid STEP or clean STL file.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 120 mm | 80 – 200 |
| Max Body Diameter | 20 mm | 10 – 40 |
| Nose Taper Length | 30 mm | 10 – 50 |
| Tail Taper Length | 25 mm | 10 – 50 |
| Wall Thickness | 2 mm | 1 – 5 |
| Weight Chamber Diameter | 10 mm | 4 – 20 |
| Weight Chamber Depth from Mating Face | 20 mm | 5 – 40 |
| Eyelet Slot Width | 3 mm | 1.5 – 6 |
| Eyelet Slot Depth into Body | 4 mm | 1 – 8 |
| Pin Diameter | 2 mm | 1 – 5 |
| Pin Length | 4 mm | 1 – 8 |
| Front Pin X | 40 mm | 10 – 110 |
| Rear Pin X | 80 mm | 10 – 110 |
| Layout Gap | 130 mm | 50 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no