Enclosures and housings
Minimalist Smartphone Stand
- Bounding box
- 75.0 × 85.0 × 59.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
# CAD Design Prompt – Minimalist Smartphone Stand Create a functional, minimalist smartphone desk stand designed for FDM 3D printing. ## 1. Overall Dimensions - Width: 75 mm - Depth: 85 mm - Maximum height: 65 mm - Base thickness: 6 mm - Design as a single integrated component. ## 2. Base Design - Rectangular flat base measuring 75 × 85 mm. - Thickness of 6 mm. - Add small rounded corners with a 3 mm radius. - Ensure the bottom surface is completely flat for stable bed adhesion. ## 3. Rear Phone Support - Create an inclined backrest to support a smartphone at approximately 60 degrees from the horizontal base. - Backrest width: 65 mm. - Backrest thickness: 7 mm. - Backrest should extend approximately 54 mm vertically from the base. - Use smooth transitions between the backrest and base. - Add fillets to remove sharp edges. ## 4. Front Retaining Lip - Add a front retaining lip to prevent the smartphone from sliding forward. - Width: 60 mm. - Height above base: 11 mm. - Thickness/depth: 8 mm. - Create a centred cable opening measuring 14 mm wide to allow a charging cable to pass through. ## 5. Design Requirements - All components must form one solid integrated body. - Avoid unnecessary decorative features. - Ensure sufficient structural strength. - No sharp edges or unnecessarily thin walls. - Keep the design compact and lightweight. - Ensure the phone can be placed and removed easily. - The charging cable opening must remain accessible. ## 6. Manufacturing Requirements - Optimise for FDM 3D printing. - Material: PLA or PLA+. - No assembly required. - Prefer minimal support structures. - Design suitable for a 0.4 mm nozzle. - Ensure the model is a closed, watertight solid. ## 7. CAD Output Generate: 1. Editable 3D solid model. 2. STEP file (.step). 3. STL file (.stl). 4. Isometric view of the finished design. 5. Dimensioned engineering drawing in millimetres. Prioritise dimensional accuracy, functionality, printability and a clean minimalist appearance over decorative styling.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 75 mm | 50 – 120 |
| Base depth | 85 mm | 50 – 140 |
| Base thickness | 6 mm | 3 – 10 |
| Corner radius | 3 mm | 0 – 8 |
| Backrest width | 65 mm | 20 – 100 |
| Backrest vertical height above base | 54 mm | 20 – 56 |
| Backrest thickness | 7 mm | 3 – 8 |
| Backrest angle from horizontal | 60 deg | 45 – 75 |
| Backrest bottom Y offset | -4 mm | -20 – 0 |
| Front lip width | 60 mm | 20 – 100 |
| Front lip height above base | 11 mm | 3 – 20 |
| Front lip depth | 8 mm | 3 – 15 |
| Cable opening width | 14 mm | 5 – 30 |
| Cable opening height above base | 6 mm | 2 – 11 |
| Backrest edge fillet | 1.5 mm | 0 – 3 |
| Front lip fillet | 1 mm | 0 – 2.5 |
| Backrest-to-base transition fillet | 2 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
