Enclosures and housings
Miniature Vertical Lift Storage Robot
- Bounding box
- 150 × 200 × 408 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
"A complete mechanical assembly of a miniature vertical lift storage robot. The structure consists of a flat rectangular base plate 150mm wide by 200mm deep. Rising from the back of the base are two vertical rectangular masts, each 400mm tall and 20mm thick, spaced 80mm apart. Between the masts is a flat, movable carriage plate, 60mm by 60mm. Attached to the carriage is a small, horizontal sliding fork extended forward. In front of the mast, resting on the base, is a vertical rack structure holding three small open-top storage bins. Each bin is 50mm wide, 70mm deep, and 40mm high, stacked vertically with 10mm of clearance between them."
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 150 mm | 50 – 300 |
| Base depth | 200 mm | 50 – 400 |
| Base plate thickness | 8 mm | 2 – 20 |
| Mast height above base | 400 mm | 100 – 800 |
| Mast square thickness | 20 mm | 5 – 50 |
| Mast center spacing | 80 mm | 20 – 200 |
| Mast back edge margin | 15 mm | 0 – 100 |
| Carriage plate width | 60 mm | 20 – 150 |
| Carriage plate height | 60 mm | 20 – 150 |
| Carriage plate thickness | 6 mm | 2 – 20 |
| Carriage center height | 220 mm | 20 – 600 |
| Fork width | 50 mm | 10 – 150 |
| Fork forward depth | 70 mm | 10 – 200 |
| Fork thickness | 6 mm | 2 – 20 |
| Fork mounting base depth | 10 mm | 3 – 40 |
| Fork tine width | 8 mm | 2 – 30 |
| Bin width | 50 mm | 10 – 150 |
| Bin depth | 70 mm | 10 – 200 |
| Bin height | 40 mm | 10 – 150 |
| Bin wall thickness | 2 mm | 1.2 – 8 |
| Bin floor thickness | 3 mm | 1.2 – 10 |
| Vertical bin clearance | 10 mm | 2 – 50 |
| Rack wall thickness | 4 mm | 2 – 12 |
| Bin side clearance | 1 mm | 0.2 – 5 |
| Rack-to-mast gap | 4 mm | 0 – 30 |
| Shelf thickness | 3 mm | 1.2 – 10 |
| Rack top margin | 8 mm | 0 – 40 |
| Rack depth extra over bin | 8 mm | 0 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no