Enclosures and housings
Miniature Electric Arc Furnace (Cutaway Exhibition Model)
- Bounding box
- 149.5 × 145 × 198 mm
- Engine
- 3D Printing B-rep
- Parameters
- 47
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Keep everything identical, just widen the cutaway opening on the cylindrical furnace shell so the entire front half of the cylinder is completely open: cut away the entire front 180-degree half of the cylindrical shell wall (from the left yellow support stand all the way across to the right orange support stand, and from just below the top lid down to the top of the bottom floor) so all three purple electrodes are completely visible inside the open furnace chamber.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate side | 140 mm | 80 – 220 |
| Base plate thickness | 8 mm | 4 – 20 |
| Base plate corner radius | 4 mm | 0 – 15 |
| Shell outer diameter | 100 mm | 50 – 180 |
| Shell height | 110 mm | 50 – 220 |
| Shell wall thickness | 6 mm | 2 – 12 |
| Shell floor thickness | 8 mm | 3 – 20 |
| Shell bottom above base plate | 20 mm | 5 – 60 |
| Spout outward length | 25 mm | 8 – 50 |
| Spout half angle | 15 deg | 8 – 35 |
| Spout lip drop | 7 mm | 2 – 20 |
| Spout height at shell | 12 mm | 5 – 25 |
| Cutaway opening arc angle across front | 180 deg | 90 – 220 |
| Top rim height below lid | 12 mm | 2 – 30 |
| Number of shell rings | 4 mm | 2 – 6 |
| Ring outward width | 3.5 mm | 1 – 8 |
| Ring height | 4 mm | 1 – 8 |
| Lid diameter | 104 mm | 70 – 200 |
| Lid thickness | 15 mm | 6 – 40 |
| Lid dome rise | 5 mm | 0 – 12 |
| Lid hole diameter | 11 mm | 4 – 20 |
| Lid hole circle diameter | 44 mm | 20 – 80 |
| Exhaust duct outer diameter | 16 mm | 10 – 30 |
| Exhaust duct inner diameter | 12 mm | 6 – 26 |
| Exhaust vertical rise | 28 mm | 15 – 60 |
| Exhaust horizontal reach | 32 mm | 15 – 60 |
| Stand height above plate | 90 mm | 40 – 160 |
| Stand centre spacing | 110 mm | 60 – 180 |
| Stand thickness | 16 mm | 6 – 30 |
| Stand depth | 60 mm | 20 – 120 |
| Cylinder body diameter | 11 mm | 6 – 20 |
| Piston rod diameter | 6 mm | 3 – 12 |
| Transformer width | 28 mm | 15 – 45 |
| Transformer depth | 24 mm | 15 – 45 |
| Transformer height | 34 mm | 15 – 60 |
| Number of cooling fins | 5 mm | 2 – 10 |
| Cooling fin depth | 3.5 mm | 1 – 8 |
| Mast height above plate | 190 mm | 80 – 260 |
| Mast column diameter | 16 mm | 8 – 40 |
| Arm length from mast axis | 60 mm | 40 – 200 |
| Arm width | 16 mm | 6 – 40 |
| Arm thickness | 10 mm | 4 – 30 |
| Arm clearance above lid | 35 mm | 1 – 80 |
| Holder plate diameter | 76 mm | 30 – 140 |
| Holder plate thickness | 10 mm | 4 – 30 |
| Electrode rod diameter | 10 mm | 4 – 20 |
| Electrode rod length | 140 mm | 60 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
