Mechanical parts
Mini Two-Part Hinge (M3)
- Bounding box
- 21.1 × 10 × 6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
small hinge with two holes m3 of 10mm x 8 mm made out of two bodies
Parameters
| Name | Value | Range |
|---|---|---|
| Length along the hinge pin | 10 mm | 6 – 40 |
| Width of each leaf plate | 8 mm | 5 – 30 |
| Leaf plate thickness | 2 mm | 1.2 – 4 |
| Hinge pin diameter | 3 mm | 2 – 8 |
| Knuckle wall thickness | 1.5 mm | 1.2 – 3 |
| M3 mounting hole diameter | 3.4 mm | 2.5 – 5 |
| Sliding clearance per side | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
