3D preview of Microscope Slide Box Set (Exploded)
Loading the interactive model…
Interactive 3D model of Microscope Slide Box Set (Exploded)

Enclosures and housings

Microscope Slide Box Set (Exploded)

1 views
Bounding box
50.1 × 51 × 22 mm
Engine
3D Printing B-rep
Parameters
16
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Create a two-part 3D printable microscope slide box set consisting of a slotted base tray and a matching slip-on telescoping lid placed 15 mm apart side-by-side on the build plate, designed for cut slides measuring 10.7 mm wide, 25 mm tall, and 1 mm thick. 1. Slotted Base Tray: - Rectangular open-top box with a 2 mm thick flat bottom and four 2 mm thick outer walls. - Internal cavity dimensions: 11.3 mm wide, 42.5 mm long, and 20 mm deep (so 25 mm tall slides protrude 5 mm above the rim). - Outer box dimensions: 15.3 mm wide, 46.5 mm long, and 22 mm tall. - Inside the two long opposite walls (42.5 mm walls), add 10 pairs of vertical divider ribs forming 10 parallel slots along the length. - Each slot gap between ribs is 1.5 mm wide, and each divider rib is 2.5 mm thick. - Each divider rib protrudes inward by only 1.3 mm (strictly less than 1.5 mm contact depth) from the inner wall, extending vertically from the floor to the top rim. 2. Matching Slip-On Lid: - Placed 15 mm away from the base tray on the same flat plane, oriented open-side facing up for support-free printing. - Rectangular open-top cap with a 2 mm thick flat base (which acts as the top roof when closed) and four 2 mm thick side walls. - Internal cavity dimensions: 15.8 mm wide, 47.0 mm long, and 12 mm deep (giving 0.25 mm slip-fit clearance around the 15.3 mm x 46.5 mm base tray, 5 mm overlap over the tray walls, and 2 mm headroom above the protruding slides).

Parameters

NameValueRange
Outer width15.3 mm8 – 50
Outer length46.5 mm20 – 150
Outer height22 mm8 – 80
Outer wall thickness2 mm1.2 – 5
Floor thickness2 mm1.2 – 6
Outer vertical corner radius1.2 mm0 – 5
Number of slide slots10 mm1 – 20
Slot gap between ribs1.5 mm0.8 – 5
Rib thickness2.5 mm1 – 6
Rib inward protrusion1.3 mm0.4 – 3
Side wall thickness2 mm1.2 – 5
Roof thickness2 mm1.2 – 6
Internal depth12 mm5 – 60
Slip-fit clearance per side0.25 mm0.1 – 0.6
Lead-in chamfer at opening0.8 mm0 – 2
Gap between the two printed parts15 mm2 – 80

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Oval Safety Snap Carabiner46.5 × 12.0 × 80.0 mmPrecision

Oval Safety Snap Carabiner

Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.

STEPSTLGLB7 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS