3D preview of Microfluidic Chip Slide Holder
Loading the interactive model…
Interactive 3D model of Microfluidic Chip Slide Holder

Brackets and mounts

Microfluidic Chip Slide Holder

1 views
Bounding box
133 × 97 × 44.7 mm
Engine
3D Printing B-rep
Parameters
36
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a single solid rectangular baseplate measuring 140 mm wide (X-axis), 110 mm long (Y-axis), and 6 mm thick (Z-axis), centered at the origin. In the exact center of the top face, cut a rectangular recessed pocket 26 mm wide (X), 76 mm long (Y), and 1.5 mm deep (Z) to hold a glass slide. Inside the center of this pocket, cut a rectangular through-hole 18 mm wide (X) and 68 mm long (Y) all the way through the baseplate, leaving a 4 mm support ledge around the inside of the pocket. On the top face of the baseplate, add 8 identical horizontal U-shaped cradle channels (4 on the left side of the pocket, 4 on the right side) aligned along the X-axis and pointing directly toward the central pocket: Place 4 cradles on the left side starting 2 mm away from the left edge of the pocket and extending 45 mm outward along the negative X-axis. Place 4 cradles on the right side starting 2 mm away from the right edge of the pocket and extending 45 mm outward along the positive X-axis. Space the 4 cradles on each side evenly along the Y-axis at Y = -27 mm, -9 mm, +9 mm, and +27 mm. Each cradle consists of two parallel vertical walls 45 mm long (X), 2 mm thick (Y), and 10 mm tall (Z), spaced 11 mm apart (inner channel width of 11 mm) to hold a cylindrical connector horizontally. On the outer vertical faces of each cradle wall, cut two small rectangular clip slots 4 mm wide (X), 1 mm deep (Y), and 10 mm tall (Z) positioned at 15 mm and 35 mm from the pocket edge. Add 2 mm fillets to the four outer vertical corners of the baseplate. Ensure all parts are merged into one solid, watertight 3D-printable body.

Parameters

NameValueRange
Plate width X140 mm60 – 220
Plate depth Y110 mm50 – 200
Plate thickness6 mm3 – 15
Outer corner fillet radius2 mm0 – 20
Slide length along Y75 mm20 – 120
Slide width along X25 mm10 – 80
Slide thickness1.1 mm0.5 – 3
Pocket clearance per side0.5 mm0.1 – 2
Window width X18 mm5 – 60
Window length Y68 mm10 – 110
Cradle length along X45 mm10 – 80
Gap from pocket edge2 mm0.5 – 20
Cradle wall thickness2 mm1 – 6
Cradle wall height10 mm3 – 30
Inner channel width11 mm3 – 30
Outermost cradle Y position27 mm5 – 50
Cradle spacing along Y18 mm5 – 30
Clip slot width X4 mm1 – 10
Clip slot depth Y1 mm0.4 – 3
First slot from pocket edge15 mm2 – 40
Second slot from pocket edge35 mm2 – 40
Bridge width X130 mm60 – 200
Bridge depth Y96 mm50 – 200
Bridge thickness5 mm3 – 12
Bridge height above bed30 mm12 – 60
Bridge centre opening X100 mm20 – 180
Bridge centre opening Y64 mm20 – 160
Post X position60 mm10 – 90
Post Y position42 mm8 – 70
Post diameter10 mm5 – 20
Connector X offset55 mm3 – 80
Connector Y offset40 mm3 – 60
Connector body diameter9 mm4 – 16
Clip height11 mm5 – 30
Clip wall thickness2.6 mm1.6 – 8
Tube outside diameter1.6 mm0.6 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Microfluidic Chip Slide Holder - Free CAD Model (STEP, STL) | TextoCAD