Enclosures and housings
Micro RC Plane Electronics Sled
- Bounding box
- 45 × 15 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a lightweight electronics sled for a micro RC plane. The base is a rectangular plate 45 mm long, 15 mm wide, and 1.5 mm thick. Add a 10 mm tall, 1.5 mm thick wall along both of the 45 mm sides to create a U-channel. Inside the channel, create a solid divider wall 1.5 mm thick located 25 mm from the front edge to separate the battery compartment from the receiver compartment. Add four 2 mm diameter through-holes on the base plate, positioned 4 mm in from each corner, to reduce weight.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 45 mm | 20 – 120 |
| Overall width | 15 mm | 10 – 60 |
| Base plate thickness | 1.5 mm | 1 – 5 |
| Side wall height | 10 mm | 3 – 40 |
| Side wall thickness | 1.5 mm | 1 – 4 |
| Divider front face, from front edge | 25 mm | 5 – 100 |
| Divider wall thickness | 1.5 mm | 1 – 4 |
| Lightening hole diameter | 2 mm | 1 – 6 |
| Hole inset from each corner | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,