Brackets and mounts
Micro RC Motor Pod + Wing Clip
- Bounding box
- 30 × 16.2 × 12 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a motor pod and wing clip for a micro RC plane. The motor pod is a cylinder 24 mm long and 9 mm in outer diameter, featuring a 7.1 mm diameter hollow center bore to hold a 7 mm coreless motor, and a 2 mm wide slot running along the side for wires. Attached flush to the side of the cylinder is a wing clip. The wing clip is a rectangular block 30 mm long, 8 mm wide, and 12 mm tall. Cut a 1.2 mm wide and 10 mm deep slot completely through the 30 mm length of the block at a 4-degree angle to hold the wing material.
Parameters
| Name | Value | Range |
|---|---|---|
| Pod length | 24 mm | 10 – 60 |
| Pod outer diameter | 9 mm | 6 – 20 |
| Motor bore diameter | 7.1 mm | 3 – 15 |
| Wire slot width | 2 mm | 0.8 – 5 |
| Bore entry chamfer | 0.6 mm | 0 – 2 |
| Clip length | 30 mm | 10 – 80 |
| Clip width | 8 mm | 4 – 20 |
| Clip height | 12 mm | 6 – 30 |
| Wing slot width | 1.2 mm | 0.6 – 3 |
| Wing slot depth | 10 mm | 3 – 25 |
| Wing slot angle | 4 deg | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o