Enclosures and housings
MFL Probe Water-Jacket Housing (Bottom Opening + Ceramic Isolation)
- Bounding box
- 80.0 × 112.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Prompt: "Modify the rectangular aluminum water jacket housing described previously (containing two 25x25x25mm magnets, two 4x3x50mm ferrite cores, and a central TMR2901 sensor) by creating a large, precise rectangular opening on the bottom face of the aluminum housing. This opening must be dimensioned to fully expose the bottom surface of both ferrite cores and the TMR2901 sensor, allowing them to be in close proximity to the inspected surface. Design a robust, thin-walled frame surrounding the opening to maintain structural integrity. Integrate a high-temperature ceramic-based thermal isolation layer between the internal magnets/sensor assembly and the surrounding aluminum water jacket structure to effectively shield the internal components from the 300°C external heat conducted through the opening frame.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing X | 80 mm | 50 – 150 |
| Housing Y | 90 mm | 50 – 150 |
| Housing Z | 50 mm | 30 – 100 |
| Wall Thickness | 6 mm | 3 – 14 |
| Cooling Channel Dia | 4 mm | 2 – 8 |
| Channel Z Offset | 0 mm | -18 – 18 |
| Port Nipple Dia | 10 mm | 4 – 20 |
| Port Bore Dia | 4 mm | 1.5 – 10 |
| Port Length | 12 mm | 4 – 30 |
| Port Hex Across Flats | 14 mm | 6 – 26 |
| Port Hex Height | 6 mm | 2 – 16 |
| Magnet Cube Size | 25 mm | 10 – 40 |
| Magnet Facing Gap | 10 mm | 2 – 40 |
| Ferrite Length | 50 mm | 20 – 80 |
| Ferrite Width | 4 mm | 1 – 16 |
| Ferrite Thickness | 3 mm | 1 – 16 |
| Sensor X | 3 mm | 1 – 15 |
| Sensor Y | 3 mm | 1 – 15 |
| Sensor Z | 1.5 mm | 0.5 – 10 |
| Bottom Opening X | 58 mm | 20 – 120 |
| Bottom Opening Y | 64 mm | 20 – 130 |
| Frame Wall Width | 6 mm | 2 – 20 |
| Frame Height | 5 mm | 1 – 20 |
| Ceramic Liner Thickness | 1.5 mm | 0.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no